Adjustable camber plates for Golf MK2 & MK3, Corrado Integrated

Einstellbare Domlager für Golf 2 & 3; Corrado von Intergrated
Einstellbare Domlager für Golf 2 & 3; Corrado von Intergrated
Einstellbare Domlager für Golf 2 & 3; Corrado von Intergrated
  IE Adjustable Camber Plates for Golf MK2, Golf MK3, Corrado and Passat 35i Chassis... more


IE Adjustable Camber Plates for Golf MK2, Golf MK3, Corrado and Passat 35i Chassis

Integrated Engineering camber plates excell when ensuring that the tire's contact patch is flat on the pavement under hard cornering. This is essential to maximizing grip levels dialing in the required amount of negative camber (leaning the tire in) for your specific tire and suspension combination. Higher grip levels cause further body roll and suspension deflection and this requires more camber. These Integrated Engineering camber plates allow maximum adjustability of camber. They also provide a stable foundation for your front suspension by replacing the compliant rubber OEM mounts with a steel bearing, eliminating unwanted movement under heavy loads.

In order to combat the spring popping and binding issues so common with many camber plates, our design incorporates a heavy duty thrust needle bearing as well. This has been taken to another level by our Full Environmental Seal technology (FES), completely sealing this bearing from the elements, which keeps your suspension operating smoothly and quietly for far longer than any other solution on the market.
Maximize your cars grip levels by getting a set of Integrated Engineering camber plates today!


Will these camber plates fit with my suspension?
We have designed our camber plates to be a direct replacement for the factory strut mounts. If you are using springs that are the same diameter as factory springs and struts that use the same nut as factory, our camber plates should be a direct fit.


How are the IE camber plates adjusted?
Our camber plates have 4 screws on the top side for easy adjustment. Due to space constraints of the Mk5/MK6 chassis, the camber plates must be unbolted from the upper shock tower for adjusting. In race applications, the shock tower can be cut open on the top to allow adjustment to be made on the car. Once they are adjusted, they are typically installed permanently and the car is aligned.


How much camber can be achieved with the IE camber plates?
We have designed our camber plates with the largest adjustment range possible. They can be adjusted more than physically possible without modifying the shock tower, which is around 2 degrees. If the shock towers are modified, more camber can be achieved.

Fits for:
VW Golf MK2
VW Golf MK3
VW Corrado
VW Passat 35i

Fits for

  • VW Corrado 2.0L 16V
  • VW Corrado G60
  • VW Corrado VR6
  • VW Golf II GTI 1.8L 16V | 129 PS
  • VW Golf II GTI 1.8L 8V | 107 PS
  • VW Golf II GTI G60 | 160 PS
  • VW Golf III VR6
  • VW Passat B3 (31/35i) 2.0L 16V
  • VW Passat B3 (31/35i) G60
  • VW Passat B3 (31/35i) VR6
Related links to "Adjustable camber plates for Golf MK2 & MK3, Corrado Integrated"
SHOPVOTE Bewertungen lesen. mehr


Prices incl. VAT plus shipping costs

Delivery time 8 - 15 Workdays

Seen cheaper?
  • 21vr6108
    • Grüner Haken Fast shipping
    • Grüner Haken 15 years motorsport experienc
    • Grüner Haken 100 % proved: we check all parts
    TUEV Rheinland
    • Grüner Haken quality management
    • Grüner Haken KBA verified
    • Grüner Haken No. 49 02 0261605
    Any questions?
    Ask Bartek!
    +49 2207 - 7056916
Just pay
Logo Vorkasse Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL Ratenkauf by easyCredit
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping