Integrated Engineeering

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 8
Hint!
R32 & V6 Schmiedekolben & Stahlpleuel Set von Wiseco & BAR-TEK® V6 24V Turbo Forged Piston & Steel Con-Rods Set...
Wiseco & BAR-TEK®: Pistons and connecting rods in a set for maximum performance Pretty good team: Forged pistons from Wiseco, X-Beam steel connecting rods from BAR-TEK® and ACL connecting rod bearings for your V6 turbo engine. This...
1,699.95€ * 1,999.95€ *
Hint!
2.0L TFSI Schmiedekolben & Stahlpleuel Set JE & BAR-TEK® 2.0L TFSI EA113 High Performance Pistons &...
X-Beam connecting rod and forged piston for 2.0L TFSI engines in a set With our 2.0L TFSI set consisting of the high-quality JE forged pistons and our X-Beam connecting rods you get a great combination of stability , performance and...
From 999.95€ *
2.0L TFSI & TSI Additional Fuel Rail INTEGRATED 2.0L TFSI & TSI Additional Fuel Rail INTEGRATED
Aircraft aluminum high flow injection manifold from Integrated Engineering. When constructing very powerful engines for the 2.0L TFSI (EA113) or TSI (EA888 Gen. 1/2), the in-line direct injection system quickly becomes inadequate with...
189.95€ *
2.0L TFSI High Performance Ventilführungen BAR-TEK® 2.5L TFSI Audi RS3 & TTRS Performance Valve...
High performance valve guides made of bronze alloy and conical design, for all 2.5L TFSI engines, as in the Audi RS3 and TTRS. These valve guides offer the following advantages: High temperature resistance Improved thermal conductivity...
349.95€ *
2.5L TFSI Audi RS3 & TTRS Turbo Inlet IE 2.5L TFSI Audi RS3 & TTRS Turbo Inlet IE
The Integrated Engineering High-Flow Turbo Inlet eliminates the highly restrictive aluminum inlet tube and replaces it with a solid cast aluminum tube that dramatically increases airflow for improved efficiency and performance. With 25%...
359.95€ *
Fuel Injector Extension for Integrated Fuel Rail Fuel Injector Extension for Integrated Fuel Rail
Injector extensions are required when short injectors such as 550 ccm be used with fuel rail. For proper installation, these are often too short. Common to VW / Audi 1.8T 20V AEB and AGU engines. This 12mm extension is simply plugged...
9.95€ *
2.5L TFSI Audi RS3 & TTRS TUSCAN I-Beam Conrods 144x22mm 2.5L TFSI Audi RS3 & TTRS TUSCAN I-Beam Conrods...
Spezial conrods for VW 2.5L 5 cylinder TFSI made in USA by Integrated Engineering. forged from vaccum drawn 2 poiece 4340 chrome moly steel very light and for extreme performance forced Pin oiling (rifle drilling) provides long wrist pin...
799.95€ *
Hint!
R32 & V6 Schmiedekolben & Stahlpleuel Set von Wiseco & BAR-TEK® R32 Turbo Forged Piston & Steel Con-Rods Set by...
Wiseco & BAR-TEK®: Pistons and connecting rods in a set for maximum performance Pretty good team: Forged pistons from Wiseco, X-Beam steel connecting rods from BAR-TEK® and ACL connecting rod bearings for your R32 turbo engine. This...
1,699.95€ * 1,999.95€ *
Hint!
VR6 Turbo Schmiedekolben & Stahlpleuel Set von Wiseco & BAR-TEK® VR6 Turbo Forged Piston & Steel Con-Rods Set by...
Optimal set for VR6 turbo engines: Wiseco pistons and BAR-TEK® connecting rods The dream team: Forged pistons & X-Beam steel connecting rods from Wiseco & BAR-TEK® for your VR6 turbo engine. With this Kombo you have perfectly coordinated...
From 1,599.95€ *
mahle tfsi kolben pleuel bartek 1.8L TSI High Performance Pistons & Conrods Set...
Optimum piston & connecting rod set for 1.8L TSI engines with chain This set is optimal for 1.8L TSI engines with chain. Included are high-quality Mahle forged pistons, ZRP steel conrods I-Beam and ACL racing bearings. With this you can...
From 1,699.95€ *
Hint!
1.8T 20V Schmiedekolben & Stahlpleuel Set WISECO & BAR-TEK® 1.8T 20V Forged Piston & Steel Con-Rod Set by...
1.8T 20V Set consisting of Wiseco pistons and BAR-TEK® connecting rods Our 1.8T 20V set is a team of perfectly matched components: High-quality forged pistons from Wiseco and our X-Beam steel conrods from BAR-TEK®. You save money on the...
999.95€ *
MAHLE forged piston set for 2.0L TFSI engines with timing belt MAHLE forged piston set for 2.0L TFSI engines...
MAHLE 2.0L Forged Pistons for High Demands The high-performance pistons by MAHLE Motorsports for all 2.0 TFSI with timing belt (like in the Golf MK5 and Golf MK6 or Audi A3, S3, TT and TT S)! With these pistons, you can very easily lower...
999.95€ *
1.8T High Performance Forged Pistons Kit MAHLE 1.8T High Performance Forged Pistons Kit MAHLE
High-Strength MAHLE Forged Pistons for 1.8T 20V Engines Forged pistons for maximum tuning demands: MAHLE forged pistons for 1.8T engines with 19 or 20 mm piston pins! MAHLE is one of the most experienced and best manufacturers of...
899.95€ *
2.0L TSI EA888 Forged Piston & Steel Con-Rod Set by MAHLE & BAR-TEK® 2.0L TSI EA888 Forged Piston & Steel Con-Rod...
For Performances above 400 HP: MAHLE Con-Rods and Pistons for 2.0L TSI Generation 3 This is the complete set for your 2.0L TSI engine of the third generation: It consists of MAHLE forged pistons, high-strength BAR-TEK ® H-beam con-rods...
1,449.95€ *
2.0L TFSI EA113 Main Bearing Girdle & Kill-Kit Balance Shafts 2.0L TFSI EA113 Main Bearing Girdle & Kill-Kit...
Set of Main Bearing Girdle and Kill-Kit for Balance Shafts for the 2.0L TFSI EA113 engines. Main Bearing Girdle for all four cylinder 2.0L TFSI. For use without Balancer Assembly. Must convert to 06A style chain driven oil pump...
1,199.95€ *
VW R32 exhaust valves FERREA VW R32 exhaust valves FERREA
Exhaust Valve by Ferrea made of very tough steel for VW R32 engines. VAG OEM-valves have the big disadvantage that they can easily break because inner hole for the natrium cooling. The valves from Supertech have the following advantages:...
Content 12 Stück
519.95€ *
VW R32 intake valves FERREA VW R32 intake valves FERREA
Intake Valve by Ferrea made of very tough steel for VW R32 engines. VAG OEM-valves have the big disadvantage that they can easily break because inner hole for the natrium cooling. The valves from Supertech have the following advantages:...
Content 12 Stück
369.95€ *
VW R32 Sport Ventilfedern Satz FERREA VW R32 Sports Valve Springs Set FERREA
Ferrea Valvesprings and Titanium Retainers kit for VW R32 engines. Putting a Tuning cam in Your engine don`t forget about Your Valvetrain! In kit included: 24 dual springs exhaust Titan retainers Spring seat locator Ferrea is also used...
1,299.95€ *
BMW E36 M3 52B32 US Schmiedekolben-Satz JE BMW E36 M3 S52B32US High Performance...
JE High Performance Piston kit for all BMW E36 3.2L S52B32 US engines. Features: much lighter reinforced complete kit with rings and pins bore size 86,50 or 87,00mm ( OEM 86,40mm ) 22mm piston pin diameter For following BMW E36 3.2L...
1,029.95€ *
2.0L TSI EA888 Schmiedekolben & Stahlpleuel Set JE & BAR-TEK® 2.0L TSI EA888 High Performance Pistons &...
Output up to 800 hp: Pistons and connecting rods for 2.0L TSI engines with timing chain With this set you have the perfect combination of forged pistons and conrods for your 2.0L TSI engine: The high performance pistons come from JE...
From 1,049.95€ *
mahle tfsi kolben pleuel bartek 2.0L TFSI EA113 High Performance Pistons &...
Conrods and pistons complete set for your 2.0L TFSI Our complete set for all 2.0L TFSI EA113 engines with timing belt is a dream team of high-strength steel conrods with X-Beam and high-performance forged pistons from MAHLE. While the...
From 1,499.95€ *
2.0L TFSI mit Kette Schmiedekolben-Satz JE 2.0L TSI with Chain Driven High Performance...
High Performance Pistons kit for all 2L TFSI chain driven engines. Features: much lighter reinforced complete kit with rings and pins also for OEM bore size available 82,50mm 21mm piston pin diameter For 2.0 TFSI engine type EA888 When...
From 679.95€ *
VW TUSCAN I-Schaft Pleuel 144x20mm Integrated VW TUSCAN I-Beam Conrods 144x20mm Integrated
TUSCAN I-Beam Conrods made in the USA by Integrated Engineering . The best rods money can buy! Very light and for extreme performance. With ARP rod bolts. For horespower up to 1000hp capable! VW / Audi 1.8T with 20mm piston pins VW /...
599.95€ *
2.0 TFSI Sport Ventilfedern Satz SUPERTECH 2.0L TFSI EA113 Sports Valve Springs Set SUPERTECH
Supertech Valvesprings and Titanium Retainers kit for all 2.0 TFSI EA113 engines with belt driven. The problem with the TFSI engine is, that at high RPM the valve springs can break or the rocker arms get worn out. Both problems will...
449.95€ *
1 From 8
Viewed
Just pay
Logo Vorkasse Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL Ratenkauf by easyCredit
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping