Billet Parts

Billet parts by Integrated made in USA for VW 2.5 FSI 5 cylinder engines. Integrated offers many billet parts for the 2.5 FSI 5 cylinder engines for example cnc milled valve cover, catch can system. All parts are of high quality and milled of aluminium. Buy billet parts by Integrated for all VW 2.5 FSI 5 cylinder engines in the bar-tek online store.

Billet parts by Integrated made in USA for VW 2.5 FSI 5 cylinder engines. Integrated offers many billet parts for the 2.5 FSI 5 cylinder engines for example cnc milled valve cover, catch can... read more »
Close window
Billet Parts

Billet parts by Integrated made in USA for VW 2.5 FSI 5 cylinder engines. Integrated offers many billet parts for the 2.5 FSI 5 cylinder engines for example cnc milled valve cover, catch can system. All parts are of high quality and milled of aluminium. Buy billet parts by Integrated for all VW 2.5 FSI 5 cylinder engines in the bar-tek online store.

Close filters
 
  •  
  •  
from to
1 From 4
Fuel Injector Extension for Integrated Fuel Rail Fuel Injector Extension for Integrated Fuel Rail
Injector extensions are required when short injectors such as 550 ccm be used with fuel rail. For proper installation, these are often too short. Common to VW / Audi 1.8T 20V AEB and AGU engines. This 12mm extension is simply plugged...
15.95€ *
1.8T Vacuumanschluss Intergrated 1.8T Micro Vacuum Manifold
1.8T Micro Vacuum Manifold The Integrated Engineering micro vacuum manifold provides a sleek and cost effective solution to plumb your components requiring a vacuum source into your intake manifold. This simple fitting provides all of...
49.95€ *
2.0 TFSI TSI Adapter Dash 10 Motorentlüftung 2.0 TFSI TSI Rear Breather Adapter Plate Dash 10
billet adapter dash 10 by integrated of the rear breather on the turbocharger. This is perfect for installing catch can system with dash 10 line. It fits for 2.0L TFSI and TSI. Made of 6061 aircraft aluminum
29.95€ *
2.0L TFSI Adapter Motorentlüftung Block Dash 10 BILLET 2.0L TFSI Block Breather Adapter Dash 10 Billet
Billet block breather adapter fitting by Integrated fits for all 2.0L TFSI EA113 engines with belt driven. This dash 10 valve cover breather adapter is perfect for installing dash hoses to the catch can. These are a must for anyone...
29.95€ *
VW V6 24V Valve Cover Breather Adapter Dash 10 Billet VW V6 24V Valve Cover Breather Adapter Dash 10...
Billet valve cover breather adapter fitting by Integrated fits for all VW V6 24V engines. This dash 10 valve cover breather adapter is perfect for installing dash hoses to the catch can. Installation is very easy. Simply remove factory...
15.95€ *
2.0L TFSI Ölfilter Adapterplatte 2.0L TFSI oil filter Adapterplate
When installing a girdle kit or simply converting your 2.0T FSI (belt driven) engine to use the 06A oil pump, it is required to use the 06A oil filter housing. This is because the FSI engines have the oil check valves built in to the...
199.95€ * 249.95€ *
VR6 12V Valve Cover Breather Adapter Dash 10 Billet VR6 12V Valve Cover Breather Adapter Dash 10...
Billet valve cover breather adapter fitting by Integrated fits for all VW VR6 12V engines. This dash 10 valve cover breather adapter is perfect for installing dash hoses to the catch can. Installation is very easy. Simply remove factory...
14.95€ *
VW 16V KR PL 9A Verschlussplatte Leerlaufventil VW 16V Idle Valve Blockoff Plate
This billet port cover for all VW 16V engine closes the ilde valve hole of the intake manifold. This is used when running a digifant standalone injection system. It fits to following VW 1.8-2.0L 16V with engine code KR, PL or 9A. The...
29.95€ *
VW 2.5L 5 Zyl. FSI Sekundärluftsystem Verschlussplatte VW 2.5L 5 Cyl. FSI secondary air plate
These plates allow the removal of the entire secondary air injection / combi valve system, including the large injection pump near the oil filter. This results in a much cleaner looking engine bay, as well as less clutter and more room...
59.95€ *
VW 2.5L 5 Zyl. FSI Vakuumpumpe Verschlussplatte VW 2.5L 5 Cyl. FSI Vacuum Pump Blockoff Plate
This plate is used when removing the factory vacuum pump from the 2.5L 5 cylinder engine. This is done when the brake booster is plumbed directly to the intake manifold, commonly found in swapped applications. Removing the vacuum pump...
79.95€ *
VW 2.5L 5 Cyl. FSI fuel rail Dash 8 INTEGRATED VW 2.5L 5 Cyl. FSI fuel rail Dash 8 INTEGRATED
This is an Integrated Engineering billet aluminum fuel rail set for VW Golf 5 and 6 2.5L 5 Cyl. FSI engines. These are made in house from 6061 aircraft aluminum, to provide a beautiful one piece design. These rails have integrated...
179.95€ *
Adapter mit Drehausgleich Dash 6 auf Dash 8 Aeromotive Swivel Adapter Dash 6 to Dash 8 Aeromotive
Swivel Adapter Dash 6 to Dash 8 by Aeromotive. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade...
39.95€ *
1 From 4
Viewed
Just pay
Logo Vorkasse SLogo ofort Überweisung Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping