Integrated inlet manifolds at BAR-TEK®

The inlet manifolds by Integrated are "Made in the U.S.A." They are made of cast aluminum. Then all drill holes and sealing surfaces are CNC-machined. In our shop, we have premium inlet manifolds for VW / Audi 1.8T, 2.0 TFSI and 2.5L FSI five-cylinder engines. 

The inlet manifolds by Integrated are "Made in the U.S.A." They are made of cast aluminum. Then all drill holes and sealing surfaces are CNC-machined. In our shop, we have premium inlet manifolds... read more »
Close window
Integrated inlet manifolds at BAR-TEK®

The inlet manifolds by Integrated are "Made in the U.S.A." They are made of cast aluminum. Then all drill holes and sealing surfaces are CNC-machined. In our shop, we have premium inlet manifolds for VW / Audi 1.8T, 2.0 TFSI and 2.5L FSI five-cylinder engines. 

Filter

Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2.0L TSI EA888 HIGH FLOW Ansaugung Integrated
2.0L TSI EA888 HIGH FLOW Air Intake Kit Integrated
HIGH FLOW Air Intake Kit by Integrated for 2.0L TSI EA888 engines with chain driven. This air intake system features a generously inlet pipe that connects the IE MAF housing directly to a 5" bellmouth. Our high-flow bellmouth is neatly...
449.95€ *
1.8T Saugrohr Integrated Engineering
1.8T inlet manifold Integrated Engineering
"1.8T Integrated engineering Intake Features: Tuned for excellent mid range and top end power Optimized bellmouth inlets create maximum power at all RPM ranges Modular design allows throttle placement on either driver or passenger side...
From 799.95€ *
2.0 TFSI TSI Saugrohr Integrated Engineering
2.0 TFSI TSI intake manifold Integrated...
2.0 TFSI intake manifold by Integrated made in USA for all 2.0 TFSI and TSI engines. The intake manifold for the 2.0 TFSI and TSI engines was carefully designed to more power over the rpm range with no loss in low-end power or spool...
1,199.95€ *
2.5L FSI 5 Zylinder Saugrohr Power Kit Integrated
2.5L FSI 5 Cylinder Manifold Power Kit Integrated
Integrated Engineering 2.5L FSI 5 cylinder intake manifold. Bring your 2.5L FSI 5 cylinder VW engine to life with the Integrated Engineering cast intake manifold. By allowing your engine to breathe the way that it naturally wants to,...
From 799.95€ *
Universal Saugrohr Sammler Integrated Engineering
Universal inlet manifold Plenum Integrated...
Universal Integrated Plenum intake manifold to build your own intake manifold for all 4 cylinder engines. The Integrated Plenum intake manifold was produced for maximum power and torque with no loss in low-end power or spool time. With...
359.95€ *
Universal Saugrohr Sammler mit Flansch Platte Integrated
Universal inlet manifold Plenum with flange...
Universal Integrated Plenum intake manifold with trumpets flange plate to build your own intake manifold for all 4 cylinder engines. The Integrated Plenum intake manifold was produced for maximum power and torque with no loss in low-end...
749.95€ *
1.8T Dichtung für das Saugrohr Integrated Engineering
1.8T Intake Manifold Plenum Gasket
This is a replacement gasket for the Integrated Engineering 1.8T Transverse intake manifold. This gasket is used between the plenum and runner interface and should be replaced anytime you separate the two halves.
19.95€ *

All advantages of the inlet manifolds at a glance:

  • With an Integrated manifold, you lend your engine maximum performance, more torque and a faster response.
  • All manifolds were manufactured and tested with state-of-the-art development technology.
  • With the 1.8T manifold by Integrated, you can set different throttle diameters.
  • The manifold for the 2.0 TFSI and TSI is plug & play, suitable for engines with cam belts and chain drives.

The 2.0 TFSI TSI inlet manifold by Integrated Engineering

The inlet manifold for all 2.0 TFSI and TSI engines provides for an improved response and an enormous boost in performance in the middle and upper speed ranges. Compared with the standard part, there is considerably more torque. Through funnels, the flow goes optimally to all channels. The response meets the most sophisticated demands of tuning enthusiasts. The stable wall thickness of this inlet manifold makes it suitable for a very high boost and thus for all turbochargers. You can easily install it with plug & play; all drill holes for the sensors are in the right position. The manifold comes with black powder coating; the cover is available in blue, red or black.

The universal manifold plenum with flange plate

The universal plenum with funnel flange plate makes it easy for you to build your own inlet manifold for your four-cylinder engine. The main points here are maximum performance, torque and perfect response. The plenum also rotates and can be installed on the right or left side.

Overwhelmed by the huge selection?

If you are overwhelmed by the huge selection, just ask the BAR-TEK team. We´ll give you all the tips you need to know for the professional tuning of your car. Call us or write us an e-mail.

Viewed
Just pay
Vorkasse Mastercard Visa Sofort Überweisung Paypal Skrill
100 % safe shopping
Tüv SSL 17 Jahre
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping