Steel con-rods by Integrated Engineering

Steel con-rods by Integrated Engineering from the United States are high-quality con-rods made of 4340 chrome molybdenum steel. Despite their outstanding quality, the steel con-rods are quite affordable. Integrated offers the con-rods as H-beam or I-beam.

  • H-beam con-rods are sufficient for a 4-cylinder engine up to approx. 700 hp.
  • I-beam Tuscan con-rods are sufficient for a 4-cylinder engine up to approx. 1200 hp.

Con-rods are the connection between crankshaft and pistons. Integrated con-rods are delivered ready for installation with ARP bolts. For correct installation, you should pay heed to a few things: Important notes on the installation of ARP con-rod bolts.

Steel con-rods by Integrated Engineering from the United States are high-quality con-rods made of 4340 chrome molybdenum steel. Despite their outstanding quality, the steel con-rods are quite... read more »
Close window
Steel con-rods by Integrated Engineering

Steel con-rods by Integrated Engineering from the United States are high-quality con-rods made of 4340 chrome molybdenum steel. Despite their outstanding quality, the steel con-rods are quite affordable. Integrated offers the con-rods as H-beam or I-beam.

  • H-beam con-rods are sufficient for a 4-cylinder engine up to approx. 700 hp.
  • I-beam Tuscan con-rods are sufficient for a 4-cylinder engine up to approx. 1200 hp.

Con-rods are the connection between crankshaft and pistons. Integrated con-rods are delivered ready for installation with ARP bolts. For correct installation, you should pay heed to a few things: Important notes on the installation of ARP con-rod bolts.

Filter

Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
Hint!
VAG I-Beam Conrods 144x20mm BAR-TEK® + ACL Race Bearings VAG I-Beam Conrods 144x20mm BAR-TEK® + ACL Race...
High Quality I-Beam conrods made by BAR-TEK. Features conrods: Original BAR-TEK® 144x20mm very light for extreme performance with ARP rod bolts and ARP paste I-Schaft design up to 1000hp Additional riffle drilling hole for piston pin...
499.95€ 599.95€
VAG I-Beam Conrods 144x20mm BAR-TEK® VAG I-Beam Conrods 144x20mm BAR-TEK®
High Quality I-Beam conrods made by BAR-TEK. Features conrods: Original BAR-TEK® 144x20mm very light for extreme performance I-Schaft design up to 1000hp Additional riffle drilling hole for piston pin 100% angeled and tested in our...
399.95€
2.0L TSI EA888 Gen3 Stahl Pleuel Integrated für Aftermarket Kolben 2.0L TSI EA888 Gen3 Conrods Motorsport...
Spezial Conrods for 2.0L TSI EA888 Gen3 engines with chain driven made in the USA by Integrated Engineering. Fits for Aftermarket pistons like for example Mahle. Features: The best rods money can buy! Very light and for extreme...
From 599.95€
2.0L TSI EA888 H-Beam Conrods BAR-TEK® 2.0L TSI EA888 H-Beam Conrods BAR-TEK®
High Quality H-Beam Conrods made by BAR-TEK. Features conrods: Original BAR-TEK® 144x21mm very light for extreme performance with ARP rod bolts and ARP paste H-Schaft design up to 1000hp Additional riffle drilling hole for piston pin...
499.95€
VW 1.8T H-Schaft Stahl Pleuel 144x19mm Integrated VW 1.8T H-Beam Conrods 144x19mm Integrated
Spezial Conrods for 1.8T with 19mm piston pin made in USA by Integrated Engineering. The best rods money can buy! Very light and for extreme performance. With ARP rod bolts VW / Audi 1.8T with engine code: AMB, ARX, ARY, ATW, AUM, AWM,...
From 549.95€
Audi 2.7T Biturbo & 2.8L V6 H-Schaft Stahl Pleuel 154x21mm Integrated Audi 2.7T Biturbo H-Beam Conrods 154x21mm...
Spezial conrods for Audi 2.7L V6 Biturbo ( 30V ) and 2.8L V6 12V made in USA by Integrated Engineering. The best rods money can buy! Very light and for extreme performance. With ARP rod bolts 154mm length / 21mm piston pin Will fit...
From 839.95€
VW R32 H-Schaft Stahl Pleuel 164x20mm Integrated VW R32 H-Beam Conrods 164x20mm Integrated
Spezial conrods for VW R32 made in USA by Integrated Engineering. The best rods money can buy! Very light and for extreme performance. With ARP rod bolts 164mm length / 20mm piston pin Will fit following VW R32 engine code: BJS....
From 839.95€
Audi 2.7T Biturbo & 2.8L V6 Tuscan Stahl Pleuel 154x21mm Integrated Audi 2.7T Biturbo Tuscan Conrods 154x21mm...
Spezial i-beam conrods for Audi 2.7L V6 Biturbo ( 30V ) and 2.8L V6 12V made in USA by Integrated Engineering. The best rods money can buy! Very light and for extreme performance. With ARP rod bolts 154mm length / 21mm piston pin Will...
From 999.95€
VW VR6 2.8-2.9L H-Schaft Stahl Pleuel 164x20mm Integrated VW VR6 2.8-2.9L H-Beam Con-Rods 164x20mm...
Spezial conrods for VW 2.8-2.9L VR6 made in USA by Integrated Engineering. The best rods money can buy! Very light and for extreme performance. With ARP rod bolts 164mm length / 20mm piston pin Will fit following VW 2.8-2.9L VR6 engine...
From 839.95€
Audi 5 Zyl. H-Schaft Stahl Pleuel 159x21mm Integrated Audi 5 Cyl. H-Beam Conrods 159x21mm Integrated
Spezial conrods for Audi 5 cylinder ( 10V and 20V ) for the 236mm higher block with special forged pistons. Made in USA by Integrated Engineering. The best rods money can buy! Very light and for extreme performance. With ARP rod bolts...
From 699.95€
VW 16V & 8V Stahl Pleuel 159x21mm Integrated VW 16V & 8V Racing Conrods 159x21mm Integrated
Spezial Conrods made by Integrated for VW 16V & 8V engines with 159x21mm size. The best rods money can buy! Very light and for extreme performance. Including 4 pieces with ARP bolts. These high performance Integarted rods will fit...
From 549.95€
2.0L TFSI mit KETTE Stahl Pleuel Integrated für Aftermarket Kolben 2.0T TSI EA888 Conrods Motorsport Integrated...
Spezial Conrods for 2.0L TFSI EA888 engines with chain driven made in the USA by Integrated Engineering. Fits for Aftermarket pistons like for example Mahle or JE pistons. The best rods money can buy! Very light and for extreme...
From 599.95€
1 From 2

Exact angling of the con-rods at BAR-TEK®

You should have your con-rods angled by us so you can enjoy your engine for as long as possible. Con-rods, even those from top manufacturers, should always be measured before installation and checked for exact parallelism. Non-angled con-rods can result in one-sided piston and cylinder drill hole wear in the engine or to piston jamming. Our team will measure and align the con-rods exactly. So you can install them in your car without hesitation.

H-beam con-rods for Audi 5-cylinder engines

The Integrated H-beam con-rod for 5-cylinder engine by Audi should be used from a performance of 300 hp and upward. The standard con-rods do not withstand high stresses. The H-beam con-rods are milled from solid metal and are high-strength. With this, most extreme increases in performance of up to 900 hp are possible. Nonetheless, they are super lightweight and stable: The weight per con-rod is a mere 599 g.

Integrated con-rods for many engine models

In our shop, tuning fans can buy con-rods for many brands and engine models. The quality is very good throughout, especially for highly tuned engines. You get to the various brands here:

  • Audi
  • BMW
  • VW

Any questions about the Integrated con-rods?

We can help you with this. Contact us if you have questions about con-rods and tuning!

Viewed
Just pay
Vorkasse Mastercard Visa Sofort Überweisung Paypal Stripe
100 % safe shopping
Tüv SSL 17 Jahre
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping