Products from IE - Integrated Engineering

IE - Integrated Engineering
Close filters
 
from to
1 From 3
2.0L TFSI EA113 & TSI EA888 Gen.1/2 intake manifold install kit IE 2.0L TFSI EA113 & TSI EA888 Gen.1/2 intake...
Designed specifically for each individual application, IE Intake Manifold Install Kits are complete with all hardware necessary to install your new IE 2.0T cast intake manifold. These kits including all needed brackets to fasten OEM...
From 79.95€ *
2.0L TFSI & TSI Additional Fuel Rail INTEGRATED 2.0L TFSI & TSI Additional Fuel Rail INTEGRATED
Aircraft aluminum high flow injection manifold from Integrated Engineering. When constructing very powerful engines for the 2.0L TFSI (EA113) or TSI (EA888 Gen. 1/2), the in-line direct injection system quickly becomes inadequate with...
189.95€ *
2.0L TSI EA888 Gen.3 MQB Turbo Inlet IE 2.0L TSI EA888 Gen.3 MQB Turbo Inlet IE
Reinforced turbo inlet from IE for the new generation 1.8L and 2.0L TSI engines. With the IE Turbo Inlet, you can get the most out of the IS38 or IS20 turbo and improve performance by eliminating the factory thin plastic inlet. The cast...
139.95€ *
2.5L TFSI Audi RS3 & TTRS Turbo Inlet IE 2.5L TFSI Audi RS3 & TTRS Turbo Inlet IE
The Integrated Engineering High-Flow Turbo Inlet eliminates the highly restrictive aluminum inlet tube and replaces it with a solid cast aluminum tube that dramatically increases airflow for improved efficiency and performance. With 25%...
359.95€ *
2.5L TFSI Audi RS3 & TTRS TUSCAN I-Beam Conrods 144x22mm 2.5L TFSI Audi RS3 & TTRS TUSCAN I-Beam Conrods...
Spezial conrods for VW 2.5L 5 cylinder TFSI made in USA by Integrated Engineering. forged from vaccum drawn 2 poiece 4340 chrome moly steel very light and for extreme performance forced Pin oiling (rifle drilling) provides long wrist pin...
799.95€ *
Audi RS3 & TTRS 2.5L TFSI Carbon Cold Air Intake IE Audi RS3 & TTRS 2.5L TFSI Carbon Cold Air...
The ultimate intake for the Audi RS3 and TTRS 2.5L TFSI brings a noticable increase in performance of up to 30 hp. The 2.5L TFSI intake is make of carbon fiber and has been designed for maximum performance and air flow. The optimized...
1,499.95€ *
UNIVERSAL
Öl Catchtank geschlossen Integrated Oil Catchtank closed Integrated
Best oil catch tank on the market. Closed version. The Integrated Catch can avoids the return of oil steam to the intake stroke. The advatages of this kit are: no pollution of the intake stroke anymore. no more fluctuation of idle...
199.95€ *
2.0L TFSI Öl Catchtank + PCV Fix Integrated 2.0L TFSI EA113 Oil Catchtank + PCV Fix Integrated
MKV/MKVI R 2.0T FSI Recirculating Catch Can Kit Integrated. To prevent crankcase oil fumes from condensing and filling your turbo piping, intercooler, and intake manifold, a catch can is a must for your 2.0T FSI engine. A catch can works...
449.95€ *
1.8T Öl Catchtank Integrated 1.8T Oil Catchtank Integrated
Catch Can Kit for MK4 GTI/Golf/Jetta, Audi A3, TT, S3 and Seat Leon 1.8T We have taken the trouble out of piecing your own catch can kit together for your MK4 Golf/Jetta 1.8T. This kit features our proven catch can with internal baffles,...
399.95€ *
2.0T TFSI Öl Catchtank Kit für Billet Ventildeckel Integrated 2.0T TSI Oil Catchtank Kit for Billet Valve...
MKV/MKVI 2.0T TSI Recirculating Catch Can Kit Integrated for the Billet valve cover for all 2.0 TSI E113 belt driven engines. To prevent crankcase oil fumes from condensing and filling your turbo piping, intercooler, and intake manifold,...
549.95€ *
2.0L TSI EA888 Gen3 Stahl Pleuel Integrated für Aftermarket Kolben 2.0L TSI EA888 Gen3 Conrods Motorsport...
Spezial Conrods for 2.0L TSI EA888 Gen3 engines with chain driven made in the USA by Integrated Engineering. Fits for Aftermarket pistons like for example Mahle. Features: The best rods money can buy! Very light and for extreme...
From 599.95€ *
VW 3.6L R36 H-Schaft Stahl Pleuel 164x20mm Integrated VW 3.6L R36 H-Beam Conrods 164x20mm Integrated
Spezial conrods for VW 3.6L R36 engines made in USA by Integrated Engineering. The best rods money can buy! Very light and for extreme performance. With ARP rod bolts 164mm length / 20mm piston pin Will fit all VW R36 engines. Including...
From 699.95€ *
VW 3.6L R36 TUSCAN Stahl Pleuel 164x20mm Integrated VW 3.6L R36 Tuscan Conrods 164x20mm Integrated
Spezial TUSCAN i-beam conrods for VW 3.6L R36 engines made in USA by Integrated Engineering. The best rods money can buy! Very light and for extreme performance. With ARP rod bolts 164mm length / 20mm piston pin Will fit all VW R36...
From 999.95€ *
2.0L TSI EA888 Gen3 Ladeluftkühler mit FDS System von Integrated 2.0L TSI EA888 Gen3 Performance Intercooler Kit...
The Integrated Engineering MK7 FDS intercooler system was built from the ground up to offer the ultimate in performance for your vehicle. When increasing the power output of your engine it is extremely important to ensure it has the...
1,079.95€ * 1,100.00€ *
VW 2.5L 5 Cyl. FSI fuel rail Dash 8 INTEGRATED VW 2.5L 5 Cyl. FSI fuel rail Dash 8 INTEGRATED
This is an Integrated Engineering billet aluminum fuel rail set for VW Golf 5 and 6 2.5L 5 Cyl. FSI engines. These are made in house from 6061 aircraft aluminum, to provide a beautiful one piece design. These rails have integrated...
179.95€ *
Golf 5 & Golf 6 einstellbare Domlager Intergrated mit TÜV Adjustable Camber Plates For MK5/MK6/8P/8J...
IE Adjustable Camber Plates For MK5/MK6/8P/8J Chassis. Integrated Engineering camber plates excell when ensuring that the tire's contact patch is flat on the pavement under hard cornering. This is essential to maximizing grip levels...
599.95€ *
Audi RS3 & TTRS einstellbare Domlager Intergrated mit TÜV Audi RS3 & TTRS Adjustable Camber Plates with TÜV
High Performance Adjustable Strut Mount for all Audi RS3 8P and TT RS 8J from Integrated with TÜV! For lowered vehicles, it is advisable to use an adjustable strut mount to gain better grip on the road or on the racetrack and also to...
599.95€ *
2.0L TFSI mit KETTE Stahl Pleuel Integrated für Aftermarket Kolben 2.0T TSI EA888 Conrods Motorsport Integrated...
Spezial Conrods for 2.0L TFSI EA888 engines with chain driven made in the USA by Integrated Engineering. Fits for Aftermarket pistons like for example Mahle or JE pistons. The best rods money can buy! Very light and for extreme...
699.95€ *
1.8T Saugrohr Adapterplatte großer auf kleiner Kanal 1.8T big port to small port adapter kit for...
Hot intake temperatures are the last thing you want in your high performance engine. With this phenolic transition spacer for your 1.8T engine, you will reduce intake temperatures and increase power. Designed to work as a transition...
99.95€ *
2.0T TSI EA888 Adapterplatte Kurbelgehäuseentlüftung 2.0T TSI EA888 adapter plate crankcase breather
This adapter plate is used on 2.0T TSI EA888 engines when removing the faulty factory plastic breather from the valve cover in favor of a more reliable breather system. This plate features a -10 AN o ring boss port to easily connect to...
249.95€ *
1.8T fuel rail Dash 8 INTEGRATED 1.8T fuel rail Dash 8 INTEGRATED
This is an Integrated Engineering billet aluminum fuel rail set for VW/Audi 20V 1.8T engines. These are made in house from 6061 aircraft aluminum, to provide a beautiful one piece design. These rails have integrated mounts, for a much...
144.95€ * 159.95€ *
1.9L TDI TUSCAN Stahl Pleuel 144x26mm Integrated 1.9L TDI TUSCAN Conrods Motorsport 144x26mm...
Spezial TUSCAN I-Beam conrods for VW-Audi 1.9L TDI made in USA by Integrated Engineering. The best rods money can buy! Very light and for extreme performance. With ARP rod bolts VW / Audi TDI early engines with 26mm wrist pins. Including...
699.95€ *
UNIVERSAL
Universal Saugrohr Sammler Integrated Engineering Universal inlet manifold Plenum Integrated...
Universal Integrated Plenum intake manifold to build your own intake manifold for all 4 cylinder engines. The Integrated Plenum intake manifold was produced for maximum power and torque with no loss in low-end power or spool time. With...
359.95€ *
TUSCAN I-Schaft Pleuel TDI ALH Integrated 144x26 TUSCAN I-Beam Conrods TDI ALH Integrated 144x26
"TUSCAN I-Beam Conrods for TDI ALH made in the USA by Integrated Engineering. The best rods money can buy! Very light and for extreme performance. With ARP rod bolts. For horespower up to 1000hp capable! Including 4 pieces
699.95€ *
1 From 3
Viewed
Just pay
Logo Vorkasse Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL Ratenkauf by easyCredit
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping