Products

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
169 From 169
UNIVERSAL
GARRETT GT2860R-3 Turbolader
GARRETT GT2860R-3 Turbocharger
GARRETT GT2860R-3 Turbocharger. Dual ball bearing with oil&water-cooled CHRA. Intern wastegated turbine housing with actuator. Upgrade Turbocharger for GT2554R (471171-3) and GT2854R (471171-9) The turbine wheel is molded from "Inconel"...
1,005.95€ *
Hinterachs Lager Gruppe N VAG900B (Rennstrecke)
RR Beam Pivot Bushes VAG900B (Competition)
"The standard rear beam bushes are designed to give some rear compliance steering for safer car control by the 'general' driver. VAG900B (Competition). To eliminate this and give the car a much tighter and responsive feel Vibra-Technics...
259.95€ *
High Performance Motorlager Rechts ( Rennstrecke )
High Performance Right Hand Side Engine Mount (...
"RHS Engine mounting Ford Focus RS FOR240MX (Competiton). This RHS engine mount is designed as a direct replacement for the standard Ford part on Focus RS. It reduces engine movement in all directions but in "
199.95€ *
Twintercooler für Golf MK6 2.0 T Forge FMINTMK6
Twintercooler MK6 Golf 2.0 T Forge FMINTMK6
Forge are pleased to present the "TWINtercooler" for the Golf MK6 2 litre. This intercooler is based on our proven design which adds greater efficiency throughout the entire RPM band beyond that of a single intercooler setup. We have...
899.95€ *
Ladeluftkühler für VW T5 Bus Forge FMINTVWT5
Intercooler for VAG T5 Transporter Forge FMINTVWT5
"Intercooler for VW T5 TDI Transporter Uprated front mounting intercooler for the VW T5 bus or van variants. Although significantly larger than the original intercooler this unit is a direct plug in replacement requiring no additional...
869.95€ *
G60 G-Lader Verschlussplatte VA BAR-TEK®
G60 G-Lader Cover BAR-TEK®
Metall cover for all G60 G-Lader made of high grade stainless steel. Can be used for safe storage of the G-Lader or if Bypass will be closed. Please click on the picture above.
Im Lager.
9.95€ *
16V Lambda Sonde BOSCH
16V Lambda probe BOSCH
Original Bosch Lambda probe for all 16V and 16VG60 modells. Please check your engine code for the correct probe. There are many different kind of sockets. Made in Germany!
199.95€ *
Polo 16V Lambda Sonde BOSCH
Polo 16V Lambda probe BOSCH
Original Bosch Lambda probe for all Polo 16V modells. Please check your engine code for the correct probe. There are many different kind of sockets. Made in Germany!
199.95€ *
High Performance Getriebelager Links für alle Focus (Rennstrecke)
High Performance Left Hand Side Powertrain...
"LHS Powertrain Mounting all Ford Focus FOR245MX (Competition). This LHS mounting carries approximately half the weight of the powertrain and has to react forces in the three orthogonal planes as well as rotational. The standard mount...
265.95€ *
G60 Schrauben für Auslassbogen 180°
G60 bolts for outlet big intercooler
Bolts for outlet pipe from G-Lader to big intercooler. 2 bolts and washers non rosting steel.
Im Lager.
5.95€ *
High Performance Getreibelager Rechts (Rennstrecke)
High Performance RH Engine Powertrain Mount...
"RH Engine Powertrain Mount (ST170) for Ford Focus FOR226MX (Competition). The 'Must Have' mount for controlling all that power. As FOR227M except approximately 3 times as stiff - for competition use where loads are higher and comfort is...
205.95€ *
High Performance Motorlager Rechts ( Strasse ) FOR239M
High Performance Right Hand Side Engine Mount (...
"RHS Engine mounting Ford Focus RS FOR239M ( Road ). This RHS engine mount is designed as a direct replacement for the standard Ford part on Focus RS. It reduces engine movement in all directions but in "
175.95€ *
Ford Focus (98-07) Abstützung (Rennstrecke) FOR252MX
Ford FOCUS (98-07) Torque Link (Competition)...
"Torque Link for Ford Focus ('98-'04) ZX3, RS, ST, SVT FOR252MX (Competition) The OE link allows too much engine movement for serious driving on this powerful car. Three times stiffer than the OEM. We have designed and developed a direct...
175.95€ *
High Performance Getriebelager Links für alle Focus ( Strasse ) FOR244M
High Performance Left Hand Side Powertrain...
"LHS Powertrain Mounting all Focus Ford Focus FOR239M ( Road ). This LHS mounting carries approximately half the weight of the powertrain and has to react forces in the three orthogonal planes as well as rotational. The standard mount...
239.95€ *
G60 High Performance Motorlager Vorne VAG760MX Rennstrecke (8v; 16v & VR6)
G60 High Performance Engine Mount Front...
Front Engine Mount VAG760MX Competition Golf2/Corrado(8v, 16v & VR6) The 'Must Have' mount for controlling all that power. As VAG750M except this is approximately 3 times stiffer - for competition use where loads are higher and comfort...
255.95€ *
G60 High Performance Motorlager Rechts VAG 975M (Rennstrecke)
G60 High Performance Engine Mount Right Hand...
RH Rear Mount VAG975M Competiton Golf 2 / Corrado The 'Must Have' mount for controlling all that power. As VAG970M except this is approximately 3 times stiffer - for competition where loads are higher and comfort is low priority!Reduces...
229.95€ *
16VG60 Lichtmaschinenhalter-Kit Hochblock BAR-TEK®
16VG60 Alternator Mounting-Kit Hochblock BAR-TEK®
16V-G60 Alternator mounting kit for the famous 16VG60 conversion. New aluminium lightweigth design. No problems with Alternator vibration anymore. This version is for the high block like the engine code ABF.
Noch 8 Stück im Lager.
149.95€ *
G-Lader Hohlschrauben
G-Lader Banjo bolts
2 Banjo bolts with 4 new copper washers. Always use new copper washers and do not torque the banjo bolts to much, otherwise they can crack! Made in germany.
Nur noch 2 Stück im Lager.
9.95€ *
UNIVERSAL
Garrett GT28RS
Garrett GT28RS
Ideal for 16V or 1,8T engines: - Turbine A/R 64 or 86 - Compressor A/R 60 - Inlet/outlet wheel size 60/54mm - Dual bearing for very fast response - Up to 370 hp - incl. internal Wastegate 1,6 bar - for 1,8-2,0l 4 cyl. engines - T25...
1,155.95€ *
2.0L TFSI EA113 Cable harnes for blow off K04 Tuning Kit
2.0L TFSI EA113 Cable harnes for blow off K04...
Longer cable for blow off valve. Needed for K04 Turbocharger
Im Lager.
59.95€ *
UNIVERSAL
Sealing compound Reinzosil 300°C
Sealing compound Reinzosil 300°C
Sealing compound permanently elastic silicone sealing compound, (temperature resistant from -50°C to +300°C) Safe and universal sealing - also of moving components. Whether surfaces, gaps (up to approx. 5 mm) or hairline cracks. Sealing...
Noch 7 Stück im Lager.
15.95€ *
1.8 & 2.0L TSI EA888 Gen.3 upgrade M6 bolts for Oil Pan ARP
1.8 & 2.0L TSI EA888 Gen.3 upgrade M6 bolts for...
1.8 & 2.0L TSI EA888 Gen.3 upgrade Screws for Oil Pan ARP These ARP M6 upgrade bolts for oil pan are made of extremely strong stainless steel and simply replace the original bolts. You can always reuse the screws and broken threads due...
Noch 7 Stück im Lager.
89.95€ *
169 From 169
Viewed
Just pay
Logo Pre-Payment Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping