Engine & Parts

In this section you will find a large amount of engine parts. Especially for VW, BMW and Audi, we have a huge selection for you in the range. Engine parts from reputable brands like Spesso or ARP are of the highest quality and extreme durability. Motor accessories of all kinds here in the tuning shop from BAR-TEK-tuning. Tuning parts and engine parts for upgrading, retrofitting and replacing of your old engine parts.

In this section you will find a large amount of engine parts. Especially for VW, BMW and Audi, we have a huge selection for you in the range. Engine parts from reputable brands like Spesso or ARP... read more »
Close window
Engine & Parts

In this section you will find a large amount of engine parts. Especially for VW, BMW and Audi, we have a huge selection for you in the range. Engine parts from reputable brands like Spesso or ARP are of the highest quality and extreme durability. Motor accessories of all kinds here in the tuning shop from BAR-TEK-tuning. Tuning parts and engine parts for upgrading, retrofitting and replacing of your old engine parts.

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 121
1.8T 20V seal for oil filter housing on the engine block 1.8T 20V seal for oil filter housing on the...
This seal is used to seal the oil filter housing on the engine block. Suitable for all 1.8T 20V engines. Caution: The seal is not reusable and should always be renewed.
9.95€ *
1.8T 20V Shaft seal for Crankshaft 1.8T 20V Shaft seal for Crankshaft
This seal is used to seal the crankshaft on the gearbox side in the engine block. Caution: The seal is not reusable and should always be renewed.
39.95€ *
2.9L TFSI Audi RS4 B9 Blow off valves FORGE 2.9L TFSI Audi RS4 B9 Blow off valves FORGE
In performance-enhanced engines, the diaphragms of the OEM valves tears. This leads to loss of performance. At first, you do not notice the loss of boost pressure as the membrane creeps in slowly. Forge blow-off valves eliminate this...
319.95€ *
1.8T 20V Fuel Injector adapter USCAR to EV1 BAR-TEK® 1.8T 20V Fuel Injector adapter USCAR to EV1...
With this adapter EV6 / EV14 / USCAR / LS2 / LS3 / LSX / LT1 injectors can be connected directly to wiring harnesses that are intended for Bosch EV1 injectors. Easy installation without cutting or soldering the OEM wiring harness. Price...
12.95€ *
Audi 2.7L Biturbo S4 & RS4 I-Beam con-rods 154x21mm BAR-TEK® Audi 2.7L Biturbo S4 & RS4 I-Beam con-rods...
High Strenght I-Beam connecting rods from BAR-TEK® for all Audi 2.7L V6 biturbo as in the S4 and RS4 B5. We recommend forged connecting rods from a power of 500PS upwards, since the standard connecting rods have not been developed for...
699.95€ *
2.0L TFSI RSX Einspritzventil Kit BAR-TEK 2.5L TFSI Audi TTRS & RS3 RSX Injector Kit...
5 injectors especially for the 2.5L TFSI EA855 engine for powers above 600PS. Even the 5 cylinder has limited fuel supply. If you do not want to convert to additinally intake manifold injection, we offer you the biggest availabel...
1,529.95€ *
Audi RS3 & TTRS 2.5L TFSI LPI Fuel Injector Upgrade Kit 034Motorsport Audi RS3 & TTRS 2.5L TFSI LPI Fuel Injector...
Use the full potential of your 2.5L TFSI EA855Evo engine with the upgrade kit 034Motorsport DAZA LPI (low pressure injector). In this way, with the right software, you can safely drive full E85 power. The 034Motorsport LPI upgrade kit...
749.95€ *
ARP Custom Age 625 Plus 3/8 Zoll Pleuelschrauben in 40;64mm Länge ARP Custom Age 625+ 5/16" Connection Bolts with...
ARP 5/16 "rod bolts with 38,1mm in length. Universally applicable for all H-Beam conrods . ARP custom age 625 + have been developed for the highest requirements and provide optimum safety. At high engine speed, it arrives at the...
45.95€ *
2.5L TFSI Audi RS3 & TTRS Pipercross Luftfilter 4.0L TFSI Audi RS6 C8 Pipercross air filter
Pipercross Airfilter for your 4.0L TFSI engines as built in Audi RS6 C8. Unlike their competition, Pipercross have adopted multi layered foam technology for their air filters as opposed to cotton or paper. Why? Because foam has a larger...
209.95€ *
Ford Focus RS MK2 2.5L 20V RACE main bearing shells King Racing Ford Focus RS MK2 2.5L 20V RACE main bearing...
High-performance main bearing shells for the Ford Focus RS MK2 2.5L from King Race. The additional circumferential groove results in better lubrication and thus less friction losses on the crankshaft. The XP-Tri-Metal racing series is a...
129.95€ *
Ford Focus RS MK2 2.5L 20V forged pistons & steel connecting rods K1 & Wiseco Ford Focus RS MK2 2.5L 20V forged pistons &...
Ford Focus RS MK2 2.5L 20V forged pistons & steel connecting rods K1 & Wiseco Our piston & connecting rod set is a team of perfectly matched components: high-quality forged pistons from Wiseco and K1 H-beam steel connecting rods. In...
1,399.95€ *
Ford Focus RS MK2 2.5L 20V Forged piston set MAHLE Ford Focus RS MK2 2.5L 20V Forged piston set MAHLE
Forged high-performance pistons from MAHLE Motorsport for Ford Focus RS 2.5L 20V engines. Features: Original Mahle Motorsport Extremely light thanks to a special alloy Reinforced for maximum performance Also available with a serial bore...
1,199.95€ *
2.5L TFSI Audi RS3 & TTRS High End Pistons & Conrod Kit DP Pistons & BAR-TEK® 2.5L TFSI Audi RS3 & TTRS High End Pistons &...
Our new high performance pistons, for those who find mainstream too boring. Ideal set of our high-end DP forged pistons and steel connecting rods for 2.5L TFSI engines In this set you have the perfect combination of forged pistons,...
2,405.95€ *
VR6 Piston installation tool VAG 3278 VR6 Piston installation tool VAG 3278
Piston installation tool especially for VR6 engines to prevent damage to the piston rings from the chamfered cylinder liners. The perfect tool for your workshop equipment. Features: enables non-destructive assembly of the pistons...
35.95€ *
Hint!
Great offer!! BAR-TEK® Great offer!! BAR-TEK®
Great offer, cheaper is always possible! You want 1000 hp but the pocket money is not enough? NO PROBLEM!! With our hammer offer you get a complete engine conversion for less than 1 € with TÜV and 1000 PS. We also offer the "If it...
0.95€ * 999,999.95€ *
2.5L TFSI Audi RS3 8V & TTRS 8S Carbon Fiber Engine Cover 2.5L TFSI Audi RS3 8V & TTRS 8S Carbon Fiber...
034Motorsport's Carbon Fiber Engine Cover Overlay for the Audi RS3 & Audi TTRS is designed to tastefully complement the factory engine bay with a beautiful carbon fiber weave that is perfectly matched to the X34 Carbon Fiber Air Intake...
449.95€ *
TFSI & TSI Low Pressure Fuel Pump Control Unit TFSI & TSI Low Pressure Fuel Pump Control Unit
Control unit for the fuel pump for all TFSI & TSI engines. If you have installed an upgrade fuel pump, it can often happen that it does not always work correctly. In most cases, a defective pump is then concluded. Our experience has...
119.95€ *
2.0L TSI EA888 Gen.3 MQB RACE Alu DSG cooler CSF 2.0L TSI EA888 Gen.3 MQB RACE Alu DSG cooler CSF
Alu DSG cooler from CSF for your 2.0L TSI EA888 of the 3rd generation. The factory coolant comes from the engine block into a Y-piece, where it divides into the engine water cooler and then into the DSG cooler. This DSG cooler is...
749.95€ *
2.5L TFSI Audi RS3 8V & TTRS 8S Throttle Body Intake Pipe 2.5L TFSI Audi RS3 8V & TTRS 8S Throttle Body...
Billet throttle body & intercooler exhaust pipe for your Audi RS3 and TTRS (8V / 8S) The Elbow was made on a modern 5-axis CNC machine. The intake manifold for the throttle valve replaces the standard, much too small series tube with a...
599.95€ *
TDI Stehbolzen Zylinderkopf ARP VAG TDI Pump/Nozzle Head Stud Kit ARP
Complete kit for the cylinder head for all 1.9L TDI pump/nozzle engines. A MUST for all engines that drive with increased boost pressure! ARP is the market leader in this field. The studs are made of 8740 chromoly steel and have rounded,...
269.95€ *
MQB Dogbone Insert for Subframe Mount BAR-TEK® MQB Dogbone Insert for Subframe Mount BAR-TEK®
The BAR-TEK® Dogbone Insert limits drivetrain movement, helping to reduce wheel hopping and torque steering. Especially with tuned engines a must. features made of thick high-strength stainless steel reduces the wobble of the drive train...
35.95€ * 39.95€ *
 Borehole brushes BAR-TEK® Borehole brushes BAR-TEK®
Our borehole brushes are ideal for cleaning any motor, borehole and hole. The brushes are made of nylon and thus prevent scratches or damage to the material. The set consists of 10 brushes in different diameters and is therefore suitable...
15.95€ *
16V Pleuellagerschalen Motorsport Audi 2.7L Biturbo S4 & RS4 Conrod bearing shells
2.7L V6 biturbo connecting rod bearing shells for series or upgrade steel connecting rods. These cups are designed to understand high engine performance. Longer engine life thanks to personal coatings. The multiple coating improves the...
345.95€ *
Toyota GR Supra MK5 A90 Oil Catchtank Kit FORGE Toyota GR Supra MK5 A90 Oil Catchtank Kit FORGE
Oil catch tank kit for the Toyota Supra A90 and the BMW Z4 with B58 engine. Not just beautifully designed, but designed to absorb the maximum amount of harmful contaminants, oil deposits, fuel vapors and moisture that are normally...
399.95€ *
1 From 121

Small to medium-sized upgrades with noticeable impact

Our smaller performance kits are the most affordable way of tuning, whose impact is something you´ll notice right away. Our level 1 G60 performance kit consists only of chip tuning, a 68 pulley and a cam belt. This small modification gets unused potential out of your G60 engine. The 2.0L TFSI V1 tuning kit is somewhat more extensive. This kit is driven by the BAR-TEK boss himself. With it, you implement real engine performance of up to 350 hp since all parts are perfectly matched to one another. The incredible acceleration guarantees you´ll get butterflies in your stomach! This kit includes, for example, a KKK turbocharger, injection nozzles, power pipe kit, blow-off valve, stud bolts and much more.

You want to go for all-out hp?

In our product range, you also find large performance kits with which you can get all-out hp from your car. They are much more extensive than the level 1 and level 2 kits and require more elaborate conversion measures. But for that, you will certainly get power and performance with a real race car feeling. The 2.0L TFSI V3 tuning kit K04 up to 480 hp by BAR-TEK, for example, is one of the best on the market. With a stupefying 480 hp, you´ll be a star both on the road and at the track. The power output and the response are simply enormous since all parts of the performance kit have been matched perfectly to one another. Included are a V3 upgrade K04 turbocharger, RSX injector kit by BAR-TEK, high-flow blow-off adapter by BAR-TEK and much more. Have lots of fun with this awesome kit!

Problems with making a choice?

We help you when you are in the grip of an agony of choice. Call us or write us an e-mail.

Viewed
Just pay
Logo Pre-Payment Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL Ratenkauf by easyCredit
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping