Air Intake

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 7
NEW
2.0L TSI EA888 Gen.3B MQB Open Air Intake PEX with TÜV for Polo GTI / Audi A1 APR
2.0L TSI EA888 Gen.3B MQB Open Air Intake PEX...
Attention: for articles from APR with expert opinion, the VIN must always be specified in order to issue the expert opinion on the respective vehicle. The specification of the VIN is done in the course of the ordering process, there you...
329.95€ *
2.5L TFSI Audi TTRS & RS3 Turbo Inlet THE-Tuner
2.5L TFSI Audi TTRS & RS3 Turbo Inlet THE-Tuner
Our THE- intake pipe to the turbocharger, which is cast from aluminum, is the only one and the largest possible on the market. Since we have utilized the installation space as much as possible and the part was flow simulated, we thereby...
769.95€ *
2.5L TFSI Audi RS3 8V & TTRS 8S pressure pipe turbo intercooler THE-Tuner
2.5L TFSI Audi RS3 8V & TTRS 8S pressure pipe...
The THE aluminum pressure tube has a significantly larger cross-section than the OEM part. This allows us to achieve more flow and less back pressure. In conjunction with the two included silicone hoses, the pipe can be installed plug &...
599.95€ *
2.5L TFSI Audi TTRS & RS3 fresh air pipe from air filter THE-Tuner
2.5L TFSI Audi TTRS & RS3 fresh air pipe from...
The THE fresh air pipe from the air filter is the middle part between intake pipe on the turbocharger and the air filter box. Since we have used the installation space as well as possible and the part was flow simulated, we achieved the...
789.95€ *
2.5L TFSI Audi RS3 8V & TTRS 8S pressure pipe intercooler Throttle THE-Tuner
2.5L TFSI Audi RS3 8V & TTRS 8S pressure pipe...
The THE aluminum pressure tube has a significantly larger cross-section than the OEM part. This allows us to achieve more flow and less back pressure. In conjunction with the two included silicone hoses, the pipe can be installed plug &...
309.95€ *
APR Carbon Air Intake fits 2.9L TFSI EA839 Audi RS4 & RS5 B9
APR Carbon Air Intake fits 2.9L TFSI EA839 Audi...
This is the ultimate intakeupgrade for the Audi RS4 and RS5 (B9). 36% more throughput compared to the stock part, reduced pressure drop and better linearization of the turbochargers. This results in a power increase on top to our Stage 1...
1,789.95€ *
BAR-TEK® Turbo Inlet fits BMW S55B30 F8X M2C/M3/M4
BAR-TEK® Turbo Inlet fits BMW S55B30 F8X M2C/M3/M4
Plug'n'Play Turbo Inlets suitable for BMW M series with S55B30 engine. Easy replacement of the original plastic pipes. Neat performance plus and a whole lot more air. Especially with performance upgrades or when upgraded superchargers...
299.95€ *
2.5L TFSI Audi RS3 8V & TTRS 8S High Flow upgrade Turbo Inlet Unitronic
2.5L TFSI Audi RS3 8V & TTRS 8S High Flow...
Unitronic High Flow Turbo Inlet for the 2.5L TFSI EA855EVO engines. Made of cast aluminum and designed as a direct plug and play replacement to the stock part. The CFD optimized design allows an increase of 18 HP and 20 Nm. Airflow is...
From 499.95€ *
2.5L TFSI Audi RS3 8V & TTRS 8S High Flow Carbon Intake Kit Unitronic
2.5L TFSI Audi RS3 8V & TTRS 8S High Flow...
Unitronic's brand new Carbon Intake System for the 2.5L TFSI EA855 EVO engines delivers up to 88% more airflow over the OEM Intake. Seamless transition from the air filter to the inlet. Perfect integration using a high flow 4" carbon...
1,999.95€ *
BAR-TEK® Carbon engine cover fits BMW S58B30 G8X M3/M4
BAR-TEK® Carbon engine cover fits BMW S58B30...
Genuine carbon engine cover for your S58 engine in X3M, M3 and M4. High quality real carbon engine cover with red accents for the absolute "racing look". You want something unique in your engine compartment? Then you are exactly right...
Nur noch 2 Stück im Lager.
549.95€ *
Hint!
UNIVERSAL
BAR-TEK® swirl flap delete kit 33mm fits BMW M47 diesel
BAR-TEK® swirl flap delete kit 33mm fits BMW...
Repair kit for the swirl flaps for your BMW with M47 engine. With increasing mileage, dirt and soot deposits build up on the swirl flaps. Over time, the flaps can break and fall into the combustion chamber. To prevent engine damage, our...
Nur noch 5 Stück im Lager.
24.95€ *
Hint!
BAR-TEK® swirl flap delete kit 22mm fits BMW M57 diesel
BAR-TEK® swirl flap delete kit 22mm fits BMW...
Repair kit for the swirl flaps for your BMW with M57 engine. With increasing mileage, dirt and soot deposits build up on the swirl flaps. Over time, the flaps can break and fall into the combustion chamber. To prevent engine damage, our...
Nur noch 5 Stück im Lager.
29.95€ *
Hint!
UNIVERSAL
BAR-TEK® swirl flap delete kit 22mm fits BMW M57 diesel
BAR-TEK® swirl flap delete kit 22mm fits BMW...
Repair kit for the swirl flaps for your BMW with M57 engine. With increasing mileage, dirt and soot deposits build up on the swirl flaps. Over time, the flaps can break and fall into the combustion chamber. To prevent engine damage, our...
Nur noch 4 Stück im Lager.
24.95€ *
Hint!
UNIVERSAL
BAR-TEK® swirl flap delete kit 33mm fits BMW M57 diesel
BAR-TEK® swirl flap delete kit 33mm fits BMW...
Repair kit for the swirl flaps for your BMW with M57 engine. With increasing mileage, dirt and soot deposits build up on the swirl flaps. Over time, the flaps can break and fall into the combustion chamber. To prevent engine damage, our...
Nur noch 2 Stück im Lager.
29.95€ *
VAG 1.9L TDI EGR-Delete Kit 105-160hp 50mm exhaust gas recirculation
VAG 1.9L TDI EGR-Delete Kit 105-160hp 50mm...
EGR-Delete Kit to replace the original EGR valve for exhaust gas recirculation in many VAG diesel engines. The kit allows you to positively influence the performance and longevity of your diesel with just a few simple steps. Over time,...
39.95€ *
2.5L TFSI Audi RS3 8V & TTRS 8S Repair Kit for Carbon Open Air Intake APR
2.5L TFSI Audi RS3 8V & TTRS 8S Repair Kit for...
The APR Intake Kit outperforms factory components by up to 45%. More flow, more power. This is the first step you should take if you want to optimize the intake area. Here, unfortunately, it often comes to the problem that the clamp to...
86.99€ *
2.0L TFSI Audi A4 & A5 intake hose for K04-064 conversion BAR-TEK®
2.0L TFSI Audi A4 & A5 intake hose for K04-064...
K04 intake hose for longitudinally installed 2.0L TFSI engines like in the Audi A4 and A5. Our 2.0L TFSI intake hose is perfect for highest demands. It is specially designed for K04-064 conversions. It consists of four layers of silicone...
99.95€ *
2.0L TSI EA888 Evo4 Engine Cover Carbon Golf 8 BAR-TEK®
2.0L TSI EA888 Evo4 Engine Cover Carbon Golf 8...
Genuine carbon engine cover for your Golf 8 and many more. High-quality real carbon engine cover with red accents for the absolute "racing look". You want something unique in your engine compartment? Then you are exactly right with the...
Im Lager.
439.95€ *
2.5L TFSI Audi RS3 8V & TTRS 8S Engine Cover Carbon BAR-TEK®
2.5L TFSI Audi RS3 8V & TTRS 8S Engine Cover...
Genuine Carbon Engine Cover for your 2.5L DAZA & DNWA. High quality real carbon engine cover with red accents for the absolute "racing look". You want something unique in your engine compartment? Then you're in the right place with this...
Nur noch 1 Stück im Lager.
499.00€ *
2.0L TSI EA888 Evo4 suction VWR R600 Evo
2.0L TSI EA888 Evo4 suction VWR R600 Evo
The R600 Evo suction is the latest Intake from VWR and offers the most effective air supply 2.0L TSI Evo4 engine in the Golf 8 GTI, R, Audi A3, S3 and more. The suction brings a noticeable increase in power and torque! The VWR R600...
From 492.44€ *
4.0L TFSI Audi RS6 C7 & RS7 Pipercross air filter
4.0L TFSI Audi RS6 C7 & RS7 Pipercross air filter
Optimal engine protection and best performance with the Pipercross sports air filter for 4.0L TFSI engines. Higher air flow for more engine performance paired with best filter properties for lifelong durability. Pipercross air filters...
Nur noch 2 Stück im Lager.
84.95€ *
2.0L TFSI EA113 High Flow suction BAR-TEK®
2.0L TFSI EA113 High Flow suction BAR-TEK®
One of the best intakes on the market for the 2.0L TFSI engine. Our High Flow suction brings a noticeable increase in power. The suction was developed on the dynamometer for maximum performance. Due to the optimized design the optimal...
Nur noch 1 Stück im Lager.
399.95€ *
4.0L TFSI Audi RS6 C8 silicone intake hoses FORGE
4.0L TFSI Audi RS6 C8 silicone intake hoses FORGE
This pair of intake hoses for your Audi RS6/RS7 C8. Considering the maximum flow, the factory finned hoses can affect the flow characteristics in the engines turbos and can break down due to the extreme vacuum that can occur in tuned...
From 163.99€ *
2.0L TSI EA888 Gen.3 MQB Carbon Cold Air Intake IE
2.0L TSI EA888 Gen.3 MQB Carbon Cold Air Intake IE
Open Cold Air Carbon Intake from Integrated Engineering For turbo engines, more flow means more power! Putting performance first, the Ram Air design, 3.5" intake tube and massive 5" filter combine to create the most power possible from...
799.95€ *
1 From 7
Viewed
Just pay
Logo Pre-Payment Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping