Inlet manifolds for VW

You´ll find inlet manifolds for your VW in our shop. Owing to a greater flow, this connection between the throttle valve and cylinder head can ensure a whopping extra performance for your VW. We carry different inlet manifolds for all sorts of VW cars and engine models, e.g. the Golf and the Polo.

You´ll find inlet manifolds for your VW in our shop. Owing to a greater flow, this connection between the throttle valve and cylinder head can ensure a whopping extra performance for your VW. We... read more »
Close window
Inlet manifolds for VW

You´ll find inlet manifolds for your VW in our shop. Owing to a greater flow, this connection between the throttle valve and cylinder head can ensure a whopping extra performance for your VW. We carry different inlet manifolds for all sorts of VW cars and engine models, e.g. the Golf and the Polo.

Close filters
 
  •  
  •  
  •  
  •  
from to
2.0L TSI EA888 Gen.3 MQB Seal Kit Race Intake Manifold BAR-TEK®
2.0L TSI EA888 Gen.3 MQB Seal Kit Race Intake...
Complete sealing kit for our MQB Race intake manifold Through the assembly/disassembly of the intake manifold, the seals can be affected or become porous through aging and in the worst case become leaky. To ensure a long-lasting seal, we...
29.95€ *
2.5L TFSI RS3 & TTRS Racing Ansaugbrücke VRS
BAR-TEK® upgrade Racing intake manifold...
Racing Intake Manifold for Audi TTR and RS3 2.5L TFSI engines started at 650 HP. With additional injection nozzles in the intake ducts, you can use your original injection nozzles for more than 650 HP. Another very important advantage is...
Nur noch 2 Stück im Lager.
1,899.95€ *
2.5L TFSI Audi RS3 8V & TTRS 8S Throttle Body Inlet System APR
2.5L TFSI Audi RS3 8V & TTRS 8S Throttle Body...
The Throttle Body Inlet System is an extensive upgrade over the factory intake system from the intercooler outlet to the throttle body inlet. This replaces all components and provides a completely new, larger and better flow-designed...
989.95€ *
BAR-TEK® upgrade CNC Alu intake manifold suitable for 2.5L TFSI Audi RS3 & TTRS
BAR-TEK® upgrade CNC Alu intake manifold...
The optimal intake manifold when it comes to getting the maximum possible power out of your 5-cylinder. The intake manifold for the EA855 engine was developed and tested for a long time on the dynamometer. CNC-milled and perfectly...
From 2,049.95€ *
2.5L TFSI Audi RS3 8V & TTRS 8S Throttle Body Intake Pipe
2.5L TFSI Audi RS3 8V & TTRS 8S Throttle Body...
Throttle body & intercooler-exhaust pipe for your Audi RS3 and TTRS (8V/8S) This exhaust pipe, also called Elbow, is a real upgrade for performance lovers! It was tuned exactly to the needs of tuning fans and has provided us with a...
Im Lager.
615.95€ *
1.8 & 2.0L TSI EA888 Gen.3 Adapter Boost Gauge BAR-TEK®
1.8 & 2.0L TSI EA888 Gen.3 Adapter Boost Gauge...
Adapter for mounting a boost pressure indicator on all 1.8L and 2.0L TSI EA888 engines of the third generation, e.g. in the Golf 7, Audi S3, Leon Cupra and many more. Easy installation on a free connection on the intake manifold. The...
Im Lager.
29.95€ *
1.8T adapter kit for inlet manifold big port to small port BAR-TEK®
1.8T adapter kit for inlet manifold big port to...
1.8T adapter kit for large duct intake manifolds. With the kit you can easily mount your intake manifold with a large duct on cylinder heads with a small duct. The adapter plate is made of temperature-resistant plastic (12.5mm thick) and...
Im Lager.
59.95€ * 69.95€ *
1.8 & 2.0L TSI EA888 Punching Tool for Boost Gauge Adapter BAR-TEK®
1.8 & 2.0L TSI EA888 Punching Tool for Boost...
Punching tool for easy installation of an adapter for a boost pressure gauge. Thus, the adapter is not connected to the boost pressure sensor and there are no disturbing currents. With the thorn you can easily open a closed port on the...
Im Lager.
24.95€ *
1.8T & S4 2.7T Upgrade Drosselklappe 80mm
1.8T & S4 2.7T Hemi Upgrade throttle body 80mm
This is a genuine Mopar 80mm throttle body from the new Hemi. Featuring E-Throttle and an almost exact fit plug, it is the perfect solution for a high horsepower set up on your VW or Audi. It is fits for 1.8T and S4 2.7T Biturbo engines....
Nur noch 1 Stück im Lager.
289.95€ *
1.8T & S4 2.7T Dichtung für Upgrade Drosselklappe 80mm
1.8T & S4 2.7T Gasket for Upgrade throttle body...
Cometic Gasket for our 80mm upgrade throttle body for 1.8T and 2.7T S4 engines. Replace this gasket every time you remove your throttle body and never have to worry about a leak. Direct fit for our 80mm Upgrade throttle body. For our...
Nur noch 5 Stück im Lager.
7.69€ *
G40 Drosselklappe Motorsport BAR-TEK®
G40 Butterfly Motorsport BAR-TEK®
Modified Butterfly for inlet manifold suitable for all G40 engines. The air flow will go up with this special butterfly. The engine is reving quicker and power will increase! Easy to change.
Im Lager.
4.95€ *
16V Spezial Ansaugbrücke Kurz BAR-TEK®
16V Special Intake Manifold BAR-TEK®
16V Short runner intake manifold for Turbo or 16VG60 conversion. -Quicker boost spool up. -More HP and torque -Cooler air intake The small ports have following threads: ½ NPT and ½ 20 UNF
289.95€ *
VR6 Ansaugbrücke Schimmel Performance
VR6 Inlet manifold Schimmel Performance
The Ultimate VR6 short runner intake manifold! Benefits for both N/A and boosted applications. This intake manifold alone adds 20+whp to N/A applications and 40-100+whp to boosted applications over stock intake. The elbow adapter that...
Nur noch 1 Stück im Lager.
1,155.95€ *

The G40 racing throttle body system by DBilas

This racing throttle body system with a 45 mm throttle is suitable for all 8-valve VW engines from 1.0L to 1.6L capacity and can be installed in the Golf and Polo, for example. With the racing throttle body system, every cylinder has a throttle valve. Due to the fact that the throttle valves sit closer to the cylinder, the response is enormously improved. The manifold channels have the same length, and the fuel supply is improved. This kit comes with the inlet manifold, throttle valves, air filter box, potentiometer bracket, throttle lever, hoses and instructions. Please keep in mind that the maps must be adapted. You can get the chip tuning from us as well.

Manifold by Integrated for 1.8T engines

The inlet manifold by Integrated for all 1.8T engines ensures significantly more performance in the middle and upper speed ranges for all transverse engines from the United States. The manifold was specially developed for 1.8T engines and is used by us in our test Golf. It consists of two parts, so that the channels can be processed optimally in the funnels. The throttle valve can be installed on the left or right side. With an adapter plate, you can taper a big port to a smaller channel. With the inlet manifold, the flow goes optimally to all channels through the funnels. You will certainly feel the performance!

Accessories for the VW inlet manifold

Along with the VW inlet manifolds, our online shop has lots and lots of accessories on offer. The G60 throttle valve, for instance, through which the engine gets more air and gets it faster and the acceleration is improved. It can simply replace the smaller valve. Owing to our gaskets for VR6 12V engines or 1.8T engines, the heat transfer is considerably reduced. Moreover, you´ll get adapters and gaskets for the throttle valves and the manifold of your VW in our shop.

Any questions?

We can help you with this. Contact us if you need any tips about tuning!

Viewed
Just pay
Logo Pre-Payment Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping