Optimal accessories for cooling

Cooling is important for enhancing the performance. For the engine temperature to stay nice and low, you must give it some help when tuning. Because a higher performance means a higher temperature that can damage the original parts. These parts are often simply not made for extreme conditions.

For optimal cooling, you´ll get oil coolersintercoolers and accessories in our shop for all kinds of car brands, including:

  • Audi
  • VW
  • BMW
  • SEAT
  • Porsche
  • Ford
  • Skoda
Cooling is important for enhancing the performance. For the engine temperature to stay nice and low, you must give it some help when tuning. Because a higher performance means a higher temperature... read more »
Close window
Optimal accessories for cooling

Cooling is important for enhancing the performance. For the engine temperature to stay nice and low, you must give it some help when tuning. Because a higher performance means a higher temperature that can damage the original parts. These parts are often simply not made for extreme conditions.

For optimal cooling, you´ll get oil coolersintercoolers and accessories in our shop for all kinds of car brands, including:

  • Audi
  • VW
  • BMW
  • SEAT
  • Porsche
  • Ford
  • Skoda
Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 11
NEW
2.0L TSI EA888 Gen.3 MQB Oil Cooler Flange V2 Dash 8 BAR-TEK®
2.0L TSI EA888 Gen.3 MQB Oil Cooler Flange V2...
Our latest oil cooler flange developed by BAR-TEK®. An oil cooler is a must for optimal oil cooling. Especially for vehicles with increased performance. Our flange is now even easier to install. In addition, we have installed a check...
199.95€ *
NEW
1.8L & 2.0L TSI EA888 Gen.3 MQB Oil Cooler Kit V2 BAR-TEK®
1.8L & 2.0L TSI EA888 Gen.3 MQB Oil Cooler Kit...
BAR-TEK® Oil Cooler Kit V2 for 1.8L & 2.0L TSI MQB Gen.3 EA888 engines. Newest oil cooler kit on the market for the 1.8L and 2.0L TSI engine developed by BAR-TEK®. A must for optimal oil cooling. Especially for 3rd generation performance...
399.95€ *
BMW S55B30 F8X M2/M3/M4 Charge and Boost Pipe Set
BMW S55B30 F8X M2/M3/M4 Charge and Boost Pipe Set
The aluminum charge air pipe replaces the OEM plastic pipes that tend to burst. This defect can lead in the worst case by sucked fragments to an engine damage. The charge pipe made of aluminum has an increased diameter of 76mm compared...
569.95€ *
DSG DQ500 Transmission upgrade Oil Cooler Kit BAR-TEK®
DSG DQ500 Transmission upgrade Oil Cooler Kit...
Upgrade Oil cooler kit from BAR-TEK® for all DSG-DQ500 transmissions . Safety through optimum oil cooling for performance-enhanced DSG vehicles. For performance upgrades that go far beyond chip tuning, where high torques are also driven,...
369.95€ *
VAG DQ381 DSG gearbox upgrade Oil cooler VWR
VAG DQ381 DSG gearbox upgrade Oil cooler VWR
DSG Transmission Oil Cooler from VWR It's not just your engine oil that needs to be cooled. Your DSG transmission is prone to overheating. And the higher the horsepower, the more important it is to protect it. As you might expect, the...
769.95€ *
2.0L TSI EA888 Ölkühler-Kit V2 BAR-TEK®
2.0L TSI EA888 Ölkühler-Kit V2 BAR-TEK®
BAR-TEK® Ölkühler-Kit V2 für 2.0L TSI EA888 Motor der 1. und 2. Generation. Neustes Ölkühler-Kit am Markt für den 2.0L TSI Motor entwickelt by BAR-TEK®. Mit der V2 haben wir uns das Ziel gesetzt, einen Ölkühler zu entwickeln, der sehr...
Im Lager.
349.95€ *
1.8T 20V upgrade Cooling Water Flange Kit BAR-TEK®
1.8T 20V upgrade Cooling Water Flange Kit BAR-TEK®
Upgrade Aluminium coolant flange kit for 1.8T 20V engines. The series installed coolant flanges become porous and brittle over time. The 1.8T 20V often struggles with creeping coolant loss, which leads to increased engine temperatures...
Nur noch 2 Stück im Lager.
79.95€ *
DSG DQ500 Transmission Upgrade Oil Cooler Adapter Plate BAR-TEK®
DSG DQ500 Transmission Upgrade Oil Cooler...
Upgrade oil cooler adapter plate from BAR-TEK® for the DSG DQ500 gearbox. Safety through optimal oil cooling for uprated DSG vehicles. Kit includes black anodized plate with 3 fixation bolts.
Im Lager.
189.95€ *
2.5L TFSI Audi RS3 & TTRS Oil cooler flange BAR-TEK®
2.5L TFSI Audi RS3 & TTRS Oil cooler flange...
Special BILLET flange for connection to the engine block. Our oil cooler flange has an integrated thermostat (80°C). Suitable for all 2.5L TFSI EA855 and 855 evo engines.
Im Lager.
399.95€ *
UNIVERSAL
2.5L TFSI Audi RS3 & TTRS Oil cooler mounting kit BAR-TEK®
2.5L TFSI Audi RS3 & TTRS Oil cooler mounting...
Perfect addition to our oil cooler. Our mounting kit contains everything that is needed to mount the oil cooler. Included in the kit are Clamp 16-27 mm Rubber buffer galvanized nuts galvanized bolts
Nur noch 2 Stück im Lager.
6.95€ *
UNIVERSAL
2.5L TFSI Audi RS3 & TTRS Oil cooler holder BAR-TEK®
2.5L TFSI Audi RS3 & TTRS Oil cooler holder...
Specially developed holder for our oil cooler set. Optimal fit for mounting on the intercooler. Made of sturdy steel. The surface is black powder coated.
Nur noch 5 Stück im Lager.
149.95€ *
VW T5.2 Biturbo sealing ring oil cooler flange
VW T5.2 Biturbo sealing ring oil cooler flange
Replacement O-ring for our T5.2 Biturbo oil cooler flange from our oil cooler kit. We recommend with each disassembly / assembly of the oil cooler flange to check the sealing ring and to replace if necessary. Here you come to our...
Im Lager.
7.95€ *
BMW N54/N55/S55/N51/N52/N20/N26 alloy oil filter housing
BMW N54/N55/S55/N51/N52/N20/N26 alloy oil...
The BAR-TEK® aluminum oil filter housing replaces the original plastic part. The upgrade oil filter housing replaces the original plastic housing. Due to the aluminum and the cooling fins, the heat is dissipated much better and the...
Im Lager.
59.95€ * 89.95€ *
1.4L TSI EA211 Oil Cooler Kit BAR-TEK®
1.4L TSI EA211 Oil Cooler Kit BAR-TEK®
The high-quality oil cooler kit prevents excessive oil temperatures. It ensures a constant oil pressure. The engine seals also do not harden, which has a positive effect on the service life of the engine. 31-piece complete kit: 13-row...
Im Lager.
229.95€ *
Hint!
UNIVERSAL
Motul MoCool cooling liquid additive concentrate 500ml
Motul MoCool cooling liquid additive...
MOTUL MOCCOL is a cooling liquid additive concentrate specifically for racing to reduce engine operating temperature. Designed for state-of-the-art high-performance petrol and diesel engines in lightweight aluminium construction...
Im Lager.
13.95€ * 15.95€ *
2.0L TSI EA888 Gen.3 MQB Bracket/Bearing for Radiator Package BAR-TEK®
2.0L TSI EA888 Gen.3 MQB Bracket/Bearing for...
When removing the radiator package, it is unfortunately hardly possible to remove the holder without damage. Supplied 1 piece, for installation 2 pieces are needed.
Nur noch 5 Stück im Lager.
Content 1 Stück
11.95€ *
UNIVERSAL
Oil drain plug M14x1,5 with hole for temperature sensor BAR-TEK®
Oil drain plug M14x1,5 with hole for...
High-quality, CNC-milled temperature indicator adapter to pick up the oil temperature, directly at the oil pan. The temperature sensor is simply screwed into this adapter and measures immediately reliable. We recommend to use some Teflon...
9.95€ *
2.0L TFSI EA113 Gasket for oil filter flange & oil cooler
2.0L TFSI EA113 Gasket for oil filter flange &...
Gasket for the oil filter flange or an oil cooler on the 2.0 TFSI. Oil resistant replacement gasket. We recommend to check the gasket at every disassembly / assembly and to replace it if necessary.
Nur noch 4 Stück im Lager.
6.95€ *
UNIVERSAL
Oil cooler Pro Line Series 6 50 rows 330 x 389 x 50 mm SETRAB
Oil cooler Pro Line Series 6 50 rows 330 x 389...
Setrab oil coolers are among the best on the market and are used successfully in various racing series and motorsport disciplines. The oil coolers are developed and manufactured in Sweden. The coolers are manufactured with high precision...
329.95€ *
UNIVERSAL
Oil cooler Pro Line Series 6 25 rows 330 x 194 x 50 mm SETRAB
Oil cooler Pro Line Series 6 25 rows 330 x 194...
Setrab oil coolers are among the best on the market and are used successfully in various racing series and motorsport disciplines. The oil coolers are developed and manufactured in Sweden. The coolers are manufactured with high precision...
169.95€ *
UNIVERSAL
Oil cooler Pro Line Series 6 7 rows 330 x 52 x 50 mm SETRAB
Oil cooler Pro Line Series 6 7 rows 330 x 52 x...
Setrab oil coolers are among the best on the market and are used successfully in various racing series and motorsport disciplines. The oil coolers are developed and manufactured in Sweden. The coolers are manufactured with high precision...
79.95€ *
UNIVERSAL
Oil cooler Pro Line Series 9 10 rows 405 x 75 x 50 mm SETRAB
Oil cooler Pro Line Series 9 10 rows 405 x 75 x...
Setrab oil coolers are among the best on the market and are used successfully in various racing series and motorsport disciplines. The oil coolers are developed and manufactured in Sweden. The coolers are manufactured with high precision...
99.95€ *
UNIVERSAL
Oil cooler Pro Line Series 9 25 rows 405 x 193 x 50 mm SETRAB
Oil cooler Pro Line Series 9 25 rows 405 x 193...
Setrab oil coolers are among the best on the market and are used successfully in various racing series and motorsport disciplines. The oil coolers are developed and manufactured in Sweden. The coolers are manufactured with high precision...
189.95€ *
UNIVERSAL
Oil cooler Pro Line Series 9 34 rows 405 x 264 x 50 mm SETRAB
Oil cooler Pro Line Series 9 34 rows 405 x 264...
Setrab oil coolers are among the best on the market and are used successfully in various racing series and motorsport disciplines. The oil coolers are developed and manufactured in Sweden. The coolers are manufactured with high precision...
279.95€ *
1 From 11

Oil cooling

An oil cooler prevents high oil temperatures and thus provides for a constant oil pressure. This protects the engine gaskets against hardening, and the service life of the engine is positively affected.

With our oil cooler flange, you´ll get a true highlight for oil cooling. We developed it ourselves to make installation easy for you and provide you with the option of installing a temperature and oil pressure gauge as well. No problem thanks to the 1/8 NPT connection. The flange is made of aluminum and has a black anodized finish. An internally integrated thermostat ensures that an optimum temperature of eighty degrees is maintained. Another special feature of our design is the 12-mm bolt with inner hexagon nut. So installation is child´s play even with conventional tools.

Our oil cooler flange is also included in many of our oil cooler kits, for instance in the 1.8T oil cooler kit. This kit contains a total of 31 parts, including a 13-row oil cooler, our special flange with thermostat, steel reinforced high-pressure lines, sealant and so on. With this kit, you have both the cooling and the pressure of the oil under control.

Charge air cooling

Don´t forget charge air cooling when enhancing the performance of your car. The intake air should always be nice and cool to prevent serious damage to the engine and get the maximum performance out of your car. This is why you´ll find the perfect accessories for air cooling in our shop. They include intercoolers for various brands and models. The coolers developed by us have an optimized design and a high-quality radiator block, which is why they cool far better than the standard fitted parts. One example is the 2.0L TSI Upgrade intercooler for Golf 7 R, Audi TT, A3 & S3. Of course, we also have premium intercoolers by Integrated, Wagner and other renowned manufacturers. You also get pressure pipes and power pipes from us!

We can help you with this!

Do you need help while searching for the best parts for cooling? We can help you with this. Call us or write us an e-mail!

Viewed
Just pay
Logo Pre-Payment Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping