Close filters
 
  •  
  •  
  •  
from to
Hint!
UNIVERSAL
Motul MoCool cooling liquid additive concentrate 500ml
Motul MoCool cooling liquid additive...
MOTUL MOCCOL is a cooling liquid additive concentrate specifically for racing to reduce engine operating temperature. Designed for state-of-the-art high-performance petrol and diesel engines in lightweight aluminium construction...
Noch 10 Stück im Lager.
13.95€ * 15.95€ *
Hint!
BMW B48/B58 engine water cooler kit BAR-TEK®
BMW B48/B58 engine water cooler kit BAR-TEK®
Upgrade Water cooler kit: Put an end to reduced performance in the B48/B58 engine! You finally want to use the full tuning potential of your B48 or B58 engine? The potential of the 40i, 20i and 25i models is enormous! Unfortunately, we...
Noch 9 Stück im Lager.
549.95€ * 666.95€ *
2.0L TSI EA888 Gen.3 MQB RACE Alu DSG cooler CSF
2.0L TSI EA888 Gen.3 MQB RACE Alu DSG cooler CSF
Alu DSG cooler from CSF for your 2.0L TSI EA888 of the 3rd generation. The factory coolant comes from the engine block into a Y-piece, where it divides into the engine water cooler and then into the DSG cooler. This DSG cooler is...
769.95€ *
2.0L TSI EA888 Gen.3 MQB RACE Aluminum Water Cooler BAR-TEK®
2.0L TSI EA888 Gen.3 MQB RACE Aluminum Water...
Large aluminum water cooler from BAR-TEK® for your 2.0L TSI EA888 of the 3rd generation, e.g. in the Golf 7 GTI, Cupra, S3 and many more. If you really want to get more power with your 2.0L TSI, you can't avoid a larger water cooler....
Im Lager.
249.95€ * 325.95€ *
2.0L TSI EA888 Gen.3 MQB RACE Alu Watercooler BAR-TEK®
2.0L TSI EA888 Gen.3 MQB RACE Alu Watercooler...
Large aluminum heat exchanger from CSF for your 2.0L TSI EA888 of the 3rd generation. If you want to really increase your performance with your 2.0L TSI, you can't avoid a larger aluminum water cooler. This provides your powerful engine...
795.95€ *
Audi 2.7L Biturbo S4, RS4 & V8 Race Water Thermostat
Audi 2.7L Biturbo S4, RS4 & V8 Race Water...
RS Water Thermostat opening earlier than the standart OEM part and gives your engine a quicker cooling. Gives your engine the needed cooling, specialy when engine is tuned. With new gasket, plug and play. Opening Temp. Thermostat 71°C...
39.95€ *
1.8T 20V O-Ring gasket for Watercooler BAR-TEK®
1.8T 20V O-Ring gasket for Watercooler BAR-TEK®
New O-rings to seal the water cooler. Over time, the O-rings become porous, tear and no longer seal properly. This is followed by loss of cooling water. Original material which is also temperature and glycol resistant. We recommend to...
Im Lager.
6.95€ * 9.95€ *
VW Bus T6 2.0L Bi-TDI Upgrade Water Cooler Radiator
VW Bus T6 2.0L Bi-TDI Upgrade Water Cooler...
Upgrade Wasserradiator for the VW Bus T6 with 2.0L Bi-TDI engine (EA189 & EA288). Fits 180PS engine (CFCA engine code *) and 204PS engine (CXEA engine code *). Based on the insights we gained in the development of these up-graded charge...
995.95€ *
2.0L TFSI EA113 RACE Alu Watercooler BAR-TEK®
2.0L TFSI EA113 RACE Alu Watercooler BAR-TEK®
Large RACE aluminum water cooler from BAR-TEK® for 2.0L TFSI EA113 engines. Proper engine cooling is also important as the engine power increases. If the water temperature gets too warm, it can damage the engine. The BAR-TEK water cooler...
Im Lager.
199.95€ * 249.95€ *
1.8T 20V RACE Alu Watercooler BAR-TEK®
1.8T 20V RACE Alu Watercooler BAR-TEK®
Large RACE aluminum water cooler from BAR-TEK® for 1.8T engines. Proper engine cooling is also important as the engine power increases. If the water temperature gets too warm, it can damage the engine. The BAR-TEK water cooler has been...
Im Lager.
199.95€ * 249.95€ *
VW Golf G60 RALLY Alumium Water Radiator
VW Golf G60 RALLY Alumium Water Radiator
New water cooler for Golf G60 Rally. Especially with the G60, good cooling is very important! Old coolers can lose power due to deposits in the inner workings. This damages the engine and engine power is lost! Remedy there creates a...
Im Lager.
189.95€ * 199.95€ *
UNIVERSAL
Adapter Kühlmittelsensor M12x1.5 BILLET
Coolant Adapter Fitting M12x1.5 Billet
Billet coolant temperature sensor M12x1.5mm adapter fitting by Integrated. This coolant M12x1.5mm adapter is fit for a coolant sensor port. Perfect for installing your water line for your watercooled turbocharger or install a M12x1.5mm...
Im Lager.
9.95€ *
Viewed
Just pay
Logo Pre-Payment Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping