Shipping faster Secure Payment Worldwide shipping
Questions? Our chat will give you your answers!

Bearings and Bearing Shells

Bearings

In our shop, we stock a wide selection of high-quality bearings and bearing shells for engine tuning. Generally, a bearing is an element that has two components moving against each other. Cutting-edge bearings are usually slide bearings that are supplied with oil from the oil pump and are thus lubricated. A pressure film forms due to the friction, whose job is to prevent any metallic contact between the respective component (e.g. the crankshaft) and the slide bearing. But wear cannot be completely avoided. For that reason, the parts should be regularly checked and replaced, if needed – especially in tuning. You can buy various bearings and bearing shells for engines from us. They include, for instance:

  • main bearings for the crankshaft,
  • con-rod bearings from the world of motor racing,
  • bearings for the intermediate shaft or
  • bearing shells for con-rods or the main bearing
Loading...
Close and apply filters
Filter
69 Suitable results
sorting
high strength 4340 steel
Milled from the solid
Very light
... and more!

Can be delivered in 5 to 8 days

€659.95
High strength despite reduced thickness.
constant oil film guaranteed
Enlarged ID chamfers
Standard
0.025mm oversize
increased bearing clearance
0.25mm oversize
... and more!

Ready to ship immediately!

€139.95
Tip
The improved oil hole improves the oil film
Enlarged ID chamfers on the bearing edges
... and more!

Ready to ship immediately!

€149.98
for higher loads
Increased contact pressure
Ovality enlarged
... and more!

Ready to ship immediately!

€99.95
Better lubrication
Additional recirculating groove
Especially recommended for tuned engines.
... and more!

Ready to ship immediately!

€67.99
BAR-TEK® Motorsport
16V Conrod Bearings Motorsport
Sport bearing shells
withstand higher stresses
recommend for engines with increased boost pressure
... and more!

Ready to ship immediately!

€69.95
BAR-TEK® Motorsport
16V Main Bearings High Performance
grooved
better lubrication
less friction losses
... and more!

Delivery time 2 - 4 days

€139.95
BAR-TEK® Motorsport
16VG60 Conrod Bearings Motorsport
well suited for supercharg
withstands high boost pressures
... and more!

Can be delivered in 5 to 8 days

€165.95
Grooved
better lubrication
less friction losses
... and more!

Can be delivered in 5 to 8 days

€139.95
High Boost
black coated
withstand higher loads
Serial Conrods
Steel Conrods
... and more!

Can be delivered in 5 to 8 days

€189.95
OEM quality
long-lasting
complete set (2 pcs.)
... and more!

Delivery time 1 - 3 days

€25.95
Racing bearing shells
100% fit
Racing suitable
... and more!

Ready to ship immediately!

€229.95
2 pieces included
High OEM quality
Plug & Play
... and more!

Ready to ship immediately!

€19.95
Change during revision
incl. screws
incl. guide sleeve
... and more!

Ready to ship immediately!

€359.95
translates the balance shafts
special plastic coating
Replaced with each timing chain change
... and more!

Ready to ship immediately!

€134.99
Renew needle bearing during revision
Forced to use the same color
Beige
Gray
blue
... and more!

Ready to ship immediately!

€17.96
OEM quality
Complete set
2 pieces included
... and more!

Ready to ship immediately!

€19.95
Special coatings
Improved heat transfer
Maximum adhesion
Serial Conrods
Steel Conrods
... and more!

Ready to ship immediately!

€99.96
Tip
Lead, tin, copper Coating
hardened steel back
High strength despite reduced thickness
Standard
0.025mm oversize
0.25mm oversize
... and more!

Ready to ship immediately!

€156.99
Longer engine life
Multi-coating
High strength despite reduced thickness
0.025mm oversize
0.25mm oversize
0,50mm Übermaß
... and more!

Can be delivered in 5 to 8 days

€121.99
Oil well
Enlarged ID chamfers
hardened steel back
Standard
0.025mm oversize
0.25mm oversize
erhöhtem Lagerspiel
... and more!

Ready to ship immediately!

€137.99