Shipping faster Secure Payment Worldwide shipping
Questions? Our chat will give you your answers!

Bearings and Bearing Shells

Bearings

In our shop, we stock a wide selection of high-quality bearings and bearing shells for engine tuning. Generally, a bearing is an element that has two components moving against each other. Cutting-edge bearings are usually slide bearings that are supplied with oil from the oil pump and are thus lubricated. A pressure film forms due to the friction, whose job is to prevent any metallic contact between the respective component (e.g. the crankshaft) and the slide bearing. But wear cannot be completely avoided. For that reason, the parts should be regularly checked and replaced, if needed – especially in tuning. You can buy various bearings and bearing shells for engines from us. They include, for instance:

  • main bearings for the crankshaft,
  • con-rod bearings from the world of motor racing,
  • bearings for the intermediate shaft or
  • bearing shells for con-rods or the main bearing
Loading...
Close and apply filters
Filter
69 Suitable results
sorting
high strength 4340 steel
Milled from the solid
Very light
... and more!

Can be delivered in 5 to 8 days

€554.58
High strength despite reduced thickness.
constant oil film guaranteed
Enlarged ID chamfers
Standard
0.025 mm oversize
increased bearing clearance
0.25 mm oversize
... and more!

Ready to ship immediately!

€117.61
Tip
The improved oil hole improves the oil film
Enlarged ID chamfers on the bearing edges
... and more!

Ready to ship immediately!

€126.03
for higher loads
Increased contact pressure
Ovality enlarged
... and more!

Ready to ship immediately!

€83.99
Better lubrication
Additional recirculating groove
Especially recommended for tuned engines.
... and more!

Ready to ship immediately!

€57.13
Sport bearing shells
withstand higher stresses
recommend for engines with increased boost pressure
... and more!

Ready to ship immediately!

€58.78
grooved
better lubrication
less friction losses
... and more!

Ready to ship immediately!

€117.61
well suited for supercharg
withstands high boost pressures
... and more!

Can be delivered in 5 to 8 days

€139.45
Grooved
better lubrication
less friction losses
... and more!

Can be delivered in 5 to 8 days

€117.61
High Boost
black coated
withstand higher loads
Serial Conrods
Steel conrods
... and more!

Ready to ship immediately!

€159.62
OEM quality
long-lasting
complete set (2 pcs.)
... and more!

Ready to ship immediately!

€21.81
Racing bearing shells
100% fit
Racing suitable
... and more!

Ready to ship immediately!

€193.24
2 pieces included
High OEM quality
Plug & Play
... and more!

Ready to ship immediately!

€16.76
Change during revision
incl. screws
incl. guide sleeve
... and more!

Can be delivered in 5 to 8 days

€334.42
translates the balance shafts
special plastic coating
Replaced with each timing chain change
... and more!

Can be delivered in 5 to 8 days

€117.61
Renew needle bearing during revision
Forced to use the same color
Beige / Tan
Blue
Gray
... and more!

Delivery time 1 - 3 days

From
€16.77
OEM quality
Complete set
2 pieces included
... and more!

Ready to ship immediately!

€16.76
Special coatings
Improved heat transfer
Maximum adhesion
Serial Conrods
Steel conrods
... and more!

Ready to ship immediately!

€84.00
Tip
Lead, tin, copper Coating
hardened steel back
High strength despite reduced thickness
Standard
0.025 mm oversize
0.25 mm oversize
... and more!

Ready to ship immediately!

€131.92
Longer engine life
Multi-coating
High strength despite reduced thickness
0.025 mm oversize
0.25 mm oversize
0.50 mm oversize
... and more!

Can be delivered in 5 to 8 days

€102.51
Oil well
Enlarged ID chamfers
hardened steel back
Standard
0.025 mm oversize
0.25 mm oversize
Increased bearing play
... and more!

Ready to ship immediately!

From
€168.03
the highest quality bearing shells
Longer engine life
stable oil supply
... and more!

Ready to ship immediately!

€176.43
High Boost
Tri-metal coating
Higher engine speed
8 Cylinder
10 Cylinder
... and more!

Can be delivered in 5 to 8 days

€386.52
High Boost
Tri-metal coating
Higher motor speed possible
8 Cylinder
10 Cylinder
... and more!

Can be delivered in 5 to 8 days

€394.92
Are you unsure? We are happy to help you! Your answers will be provided by our chat!

You should replace the bearings and the shells at regular intervals

A performance-enhanced engine must be able to withstand extreme loads; this includes small components such as bearings and bearing shells. Because extreme performance results in a higher friction, parts are apt to wear more quickly. In order to prevent a power loss and damage to the car, you should only install high-quality components and check them frequently. Every once in a while, all wear parts should be replaced.

Special bearing shells from car racing

Alongside parts in OEM quality, you get special car racing bearing shells from us that are suitable for especially high performance. Our grooved main bearing shells for 8V engines derived from car racing have an additional circumferential groove. This makes for a better lubrication and reduced friction losses on the crankshaft. The oil pressure and oil flow are significantly improved.