Crankshafts and accessories for the drive

A crankshaft translates a back-and-forth movement into a rotational movement. This is done by means of the connecting rod, through which the piston forces are directed. These forces are converted into a torque, which is then passed to the gearbox via the clutch. Therefore crankshafts play a vital role in performance boosting because without them there’s no drive and, obviously, no enhanced performance. You’ll find crankshafts and all sorts of accessories in our shop, e.g.:

stroker kits
chain wheels
crankshaft sprockets
crank pulleys

With our forged crankshaft originating from car racing, you’ll achieve faster revving of the engine and a longer service life. The series parts, by contrast, are very vulnerable.

Close window

stroker kits
chain wheels
crankshaft sprockets
crank pulleys

With our forged crankshaft originating from car racing, you’ll achieve faster revving of the engine and a longer service life. The series parts, by contrast, are very vulnerable.

Filter

Layout:

1.8T Stroker & 2.0L TFSI forged lightweight...

Forged lightweight crankshaft for your 1.8T or 2.0L TFSI This crankshaft can be used on the 1.8T as a stroker shaft for capacity expansion to 2 liters. The shaft is made of high grade 4340 steel and especially tensile. CNC machined for...

1,489.95€ *

2.0L TFSI Alu Upgrade Kurbelwellenrad Kit BAR-TEK®

2.0L TFSI Alu Upgrade Pulley Kit BAR-TEK®

Upgrade crankshaft pully kit for all 2.0L TFSI EA113 engines with belt driven. The Upgrade crank pulley is lightened to reduce parasitic drag on the engine. This results in faster revving and more horsepower. The crankshaft pulley is...

119.95€ *

2.0L TFSI Alu Upgrade Kurbelwellenrad BAR-TEK®

Upgrade Kurbelwellenrad für den 2.0L TFSI Schwarz eloxiert für maximum Grip!

99.95€ *

Crankshaft for 1.8T Stroker Kit

Special Crankshaft from our 1.8T Stroker Kit! You need this crankshaft for upgrade of 2.0L engine. For the complete Stroker-Kit with forged pistons and h-beams show below under: Matching accessories !

1,199.95€ *

Audi 2.7T Biturbo STROKER Kit auf 3L Integrated

Audi 2.7T Biturbo 3L STROKER Kit Integrated

High Performance STROKER kit by Integrated for Audi 2.7L V6 Biturbo 30V engines. The Integrated 2.7T Biturbo Stroker-Kit contains all the parst that are needed to convert your 2.7T engine to a 3L Race engine! The main benefits of our...

4,449.95€ *

Audi S4 & RS4 2.7T Biturbo Harmonischer Schwingungsdämpfer

Audi S4 & RS4 2.7T Biturbo Fluidampr Crank Pulley

A stock crank pulley is designed for a stock engine. When an engine is modified, the stock crank pulley does not do it's job of keeping vibrations to a minimum. Using a special design, these pullies will eliminate much of the vibration...

499.95€ *

G60 oder 1.8T Kurbelwelle geschmiedet Motorsport

G60 or 1.8T Billet forged Crankshaft Motorsport

"High Performance Crankshaft for all 1.8T engines. -much lighter counterweights for better reving -fully balanced for smooth running -fully polished bearing surfaces -nitrited hard surface This forged crankshaft will allow the highest...

1,699.95€ *

G60 STROKER Kit BAR-TEK

High Performance STROKER kit for G60 engines. Our G60 Stroker-Kit contains all the parst that are needed to convert your G60 enigne to a 2.0L Race engine! The main benefits of our G60 Stroker Kit: -Faster spool-up through increased...

From 1,999.95€ *

K1 Kurbelwelle für Subaru EJ25 79.00mm Dual Thrust

K1 Crankshaft for Subaru EJ25 79.00mm Dual Thrust

Crankshaft specially developed for stress-intensive racing applications. Made of forged or billet premium 4340 steel. Straight hole oil system for improved lubrication Nitride for improved strength and durability Large fillet radii for...

1,787.95€ *

2.0L TFSI Oil Pump Drive Gear for Crankshaft

Oil Pump drive gear for all 2.0L TFSI EA113 engines with belt driven. Made from high strength, carburized (hardened) steel. Available separately from us. At VW only available with the crankshaft!

79.95€ *

1.8T Fluidampr Crank Pulley

499.95€ *

2.0L TFSI BILLET RACE Timing Belt Gear

The Perfect Gear Wheel for Your Audi S3 and Audi TTS Our 2.0 TFSI RACE billet timing belt drive wheel (among others, for Audi S3 and TTS) is the perfect connection to the crankshaft. Especially tuning fans will get their money’s worth...

149.95€ *

G60 Harmonic Crank Pulley

G60 Harmonic balancer for crankshaft. A stock crank pulley is designed for a stock engine. When an engine is modified, the stock crank pulley does not do it's job of keeping vibrations to a minimum. Using a special design, these pullies...

499.95€ *

TFSI & TSI HIGH TORQUE Riemenscheiben Kit

FSI 2.0T Timing Belt Gear Dowel Pin Kit

One of the major weaknesses of the TFSI & TSI platform is that the timing belt system is slightly under specced for the large load placed on it by the head. This shows up in belts that fail earlier then expected. When RPM's are...

129.95€ *

1.8 & 2.0L TSI Upgrade Kurbelwellenrad Kit NEUSPEED

1.8 & 2.0L TSI Upgrade Pulley Kit NEUSPEED

Upgrade crankshaft pully made by NEUSPEED for all 1.8 and 2.0L TSI engines with chain driven. Spinning these pulleys draw precious horsepower from your engine. NEUSPEED's powertrain engineer, using sophisticated CAD software, performed a...

299.95€ *

1.8T BILLET Timing Belt Drive Gear RACE

BILLET RACE Timing Belt Gear for 1.8T Engines Optimal connection to the crankshaft – with the 1.8T BILLET gear wheel by BAR-TEK! Milled from a solid block and high-strength. One of the greatest weaknesses in VW & Audi engines is the...

99.95€ * 149.95€ *

G60 HIGH TORQUE Riemenscheiben Kit BAR-TEK®

G60 Timing Belt Gear Dowel Pin Kit BAR-TEK®

One of the major weaknesses of the G60 platform is that the timing belt system is slightly under specced for the large load placed on it. This shows up in belts that fail earlier then expected. When RPM's are increased, more problems...

99.95€ *

1.8T & 2L TFSI Friction Disc für Kurbelwellenschraube BAR-TEK®

1.8T & 2L TFSI Friction Disc for Crank Damper...

Friction Disc (diamond disc) between bolt and crank damper for all 1.8T and 2.0L TFSI VW / Audi engines. Between crankshaft and crank damper there are very high micro-movements. Even when using ARP bolts, the connection is not 100% free...

19.95€ *

G60 Schraube für Riemenscheibe Kurbelwelle original

G60 Bolt for crankshaft sprocket OEM

Original bolt for pully crankshaft suitable for all G60 engines like in the Corrado, Golf G60, Rally Golf or Passat G60. The pully should be replaced after loosing this bolt, otherwise the crankshaft can be damaged! Please use with Loctite!

14.95€ *

1.8T Triggerrad für 2.1L Stroker Kurbelwelle

1.8T Trigger Wheel for 2.1L Stroker Crankshaft

Trigger wheel for 1.8T engines with 2.1L Stroker crankshaft. We have hunted down the correct trigger wheels to use when stroking a 1.8T engine with a 2.1L Stroker crankshaft. Includes 3 new bolts Fits for our 100mm stroke crankshaft!

69.95€ *

1.8T STROKER 2.1L HIGH TORQUE Riemenscheiben Kit

1.8T STROKER 2.1L Timing Belt Gear Dowel Pin...

One of the major weaknesses of the 1.8T 20V platform is that the timing belt system is slightly under specced for the large load placed on it by the 20v head. This shows up in belts that fail earlier then expected. When RPM's are...

199.95€ *

16VG60 Crankshaft Wheel BAR-TEK®

Spezial 16VG60 light weight crankshaft wheel. High performance aluminium with black coating. Outer diameter: 140mm Depth: 40mm Made in Germany!

49.95€ *

Stroker kits

Our stroker kits are complete assembly sets with which you can enlarge the displacement. Also called spool-up, the engine will rev a lot faster. More displacement means more performance. With the stroker kit, the entire engine lasts longer. Moreover, a higher boost and more advanced ignition are possible with it. Of course, the kits include a crankshaft, high-performance piston, steel con-rod, cylinder-head gaskets and rod bearings.

With the G60 stroker kit by BAR-TEK, you´ll enhance the displacement from 1.8L to 2.0L. With the 2.7T biturbo stroker kit by Integrated, the displacement is increased from 2.7L to 3.0L.

Crankshaft sprockets

The screw connection of the sprocket on the crankshaft is one of the greatest weaknesses with respect to the drive. If the guide groove on the crankshaft shears off, it does not only lead to major engine damage. In order to solve this problem, our high-torque kits strengthen the belt drive by means of an additional guide pin on the crankshaft. It is made of high-strength, high-quality steel. We recommend using this pin for all tuned engines. You ought to use this kit in particular when reinforced valve springs have been installed and the valve train is exposed to particularly high stress. It can be done without removing the engine.

Do you need support?

Our team is happy to answer all your questions about the crankshaft. Call us or write us an e-mail!