Extras

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 3
2.0L TSI EA888 Gen.3 MQB Middle drive sprocket timing chain BAR-TEK®
2.0L TSI EA888 Gen.3 MQB Middle drive sprocket...
Middle drive sprocket for the timing chain. The wheel translates the balance shafts so that they also rotate in the same direction. The sprocket has a special plastic coating and should be replaced every time the timing chain is changed,...
134.99€ *
BAR-TEK® Crankshaft lock suitable for BMW S55B30 F8X M2/M3/M4
BAR-TEK® Crankshaft lock suitable for BMW...
With the BMW N55 and S55 engines, the central screw of the crankshaft can loosen over time. This causes the timing to become misaligned, which can result in major engine damage. The center bolt lock, made from T-6061 billet aluminum,...
Im Lager.
79.95€ *
2.0L TSI EA888 Gen.3 MQB Needle bearing for balance shaft
2.0L TSI EA888 Gen.3 MQB Needle bearing for...
The auxiliary shafts on the EA888 engine ensure low-vibration, smooth and balanced engine running. We recommend to renew the needle bearings with every revision! At the latest when the block is honed, the shafts should be replaced to...
From 16.99€ *
2.0L TSI EA888 Gen.3 MQB High Performance Engine mounts
2.0L TSI EA888 Gen.3 MQB High Performance...
High performance engine and transmission mounts for 2.0L TSI EA888 engines of the 3rd generation, such as installed in the Golf 7 GTI, Cupra Leon and others. The original mounts can allow a roll of up to 12° under extreme loads. Our...
Im Lager.
299.95€ *
2.0L TSI EA888 Gen.3 MQB High Performance torque arm
2.0L TSI EA888 Gen.3 MQB High Performance...
High Performance torque arm for 2.0L TSI EA888 engines of the 3rd generation, such as in the Golf 7 GTI, Cupra and many more. The weak standard bearings can not withstand the torque in the long run. This can damage the water pipes for...
Im Lager.
149.95€ *
Hint!
UNIVERSAL
1.8L & 2.0L TFSI & TSI, EA113, EA888 & MQB Inspection Kit
1.8L & 2.0L TFSI & TSI, EA113, EA888 & MQB...
Now finally available in a kit! Our inspection kit is ideal for doing something good for your vehicle before the season starts. It is essential to service the engine at regular intervals to prevent engine damage and increase engine life....
From 99.95€ *
2.0L TSI EA888 MQB Gen.3 timing belt for water pump
2.0L TSI EA888 MQB Gen.3 timing belt for water...
OEM timing belt for the water pump. Connection of the water pump to the balancer shaft.
Noch 7 Stück im Lager.
13.95€ *
2.0L TSI EA888 MQB Gen.3 belt pulley water pump
2.0L TSI EA888 MQB Gen.3 belt pulley water pump
OEM pulley for the water pump belt. The matching screw with left-hand thread secures the water pump pulley to the balancer shaft. Only available from us as a kit, as both parts should always be renewed together.
34.95€ *
2.0L TSI EA888 Gen.3 MQB Chain for oil pump
2.0L TSI EA888 Gen.3 MQB Chain for oil pump
Chain for the oil pump for all 2.0L TSI engines of the third generation, such as in the Golf 7 GTI, Cupra, Audi TT and many more. The engine oil pump in the heart of every engine. It pumps the oil through nozzles, guides and channels to...
Noch 8 Stück im Lager.
22.95€ *
2.0L TSI EA888 Gen.3 MQB chain tensioner oil pump drive
2.0L TSI EA888 Gen.3 MQB chain tensioner oil...
Chain tensioner for the oil pump for all 2.0L TSI engines of the third generation, such as in the Golf 7 GTI, Cupra, Audi TT and many more. The engine oil pump is the heart of every engine. It pumps the oil through nozzles, guides and...
17.95€ *
2.0L TSI EA888 Gen.3 MQB Suction line for oil pump
2.0L TSI EA888 Gen.3 MQB Suction line for oil pump
Suction line for oil pump for all 2.0L TSI engines of the third generation, such as in the Golf 7 GTI, Cupra, Audi TT and many more. The engine oil pump in the heart of every engine. It pumps the oil through nozzles, guides and channels...
Nur noch 3 Stück im Lager.
32.95€ *
2.0L TSI EA888 Gen.3 MQB Oil Spray Nozzles (Piston Top Cooling)
2.0L TSI EA888 Gen.3 MQB Oil Spray Nozzles...
Oil injectors for all 2.0L TSI engines of the third generation, e.g. in Golf 7 GTI, Cupra, Audi TT and many more. The oil spray nozzles are used in engines to reduce the very high combustion chamber temperatures. The targeted spraying of...
Nur noch 4 Stück im Lager.
19.95€ *
UNIVERSAL
Oil drain plug OEM M14x1,5 BAR-TEK®
Oil drain plug OEM M14x1,5 BAR-TEK®
Steel oil drain plug in original equipment quality The oil drain plug should be checked at every oil change and replaced if necessary. A broken thread of the oil drain plug will also damage the thread of the oil pan, creating chips that...
Nur noch 2 Stück im Lager.
4.95€ *
2.0L TSI EA888 Gen.3 MQB Balance Shaft Repair Kit
2.0L TSI EA888 Gen.3 MQB Balance Shaft Repair Kit
The auxiliary shafts on the EA888 engine ensure low-vibration, smooth and balanced engine running. We recommend to use this repair kit with every revision! At the latest when the block is honed again, the shafts should be replaced to...
359.95€ *
UNIVERSAL
Mounting sleeve for piston BAR-TEK®
Mounting sleeve for piston BAR-TEK®
Professional tool for easy and above all safe mounting of piston in the engine block. The sleeve is simply placed on the engine block over the cylinder. The piston is then pushed into the cylinder by lightly tapping it through the...
From 32.99€ *
Audi 2.7L Biturbo S4 & RS4 BILLET crankshaft gear RACE
Audi 2.7L Biturbo S4 & RS4 BILLET crankshaft...
The perfect gear for your Audi S4 or RS4! The 2.7L BiTurbo billet timing belt drive sprockets RACE are the perfect connection to the crankshaft. Especially as a tuning fan you will get your money's worth with this crankshaft sprocket,...
Nur noch 4 Stück im Lager.
289.95€ *
1.8L & 2.0L 16V BILLET crankshaft gear RACE
1.8L & 2.0L 16V BILLET crankshaft gear RACE
The perfect gear for your 16V The Billet timing belt drive sprockets RACE are the perfect connection to the crankshaft. Especially tuning fans with turbo conversions get their money's worth with this crankshaft gear, because you'll never...
289.95€ *
2.0L TSI EA888 Gen.3 MQB cover control box
2.0L TSI EA888 Gen.3 MQB cover control box
Cover for the timing chain or the timing housing. Should always be renewed when replacing the chain. Incl. oil seal for the crankshaft
Nur noch 3 Stück im Lager.
99.95€ *
2.0L TSI EA888 Gen.2 cover control box
2.0L TSI EA888 Gen.2 cover control box
Cover for the timing chain or the timing housing. Should always be renewed when replacing the chain. Incl. oil seal for the crankshaft
79.95€ *
VAG 1.6L & 2.0L TDI Seal Kit Oil Filter Housing Complete from 2013
VAG 1.6L & 2.0L TDI Seal Kit Oil Filter Housing...
We recommend to replace the seals of the oil filter housing with each disassembly / assembly. We replace the seals each time one of our oil cooler kits . Included in the kit: 3x double seal 1x O-ring seal
Im Lager.
29.95€ *
2.0L TSI EA888 Gen.3 MQB Dogbone Insert for Subframe Mount BAR-TEK®
2.0L TSI EA888 Gen.3 MQB Dogbone Insert for...
The BAR-TEK® Dogbone Insert limits drivetrain movement, helping to reduce wheel hopping and torque steering. Especially with tuned engines a must. features made of thick high-strength aluminium reduces the wobble of the drive train...
From 29.99€ *
UNIVERSAL
Test reports for engine construction
Test reports for engine construction
Test reports for the engine construction BAR-TEK® The BAR-TEK measurement protocols enable quick and precise checking. All data are recorded manually, so there is no further source of errors in engine construction. Data such as ring...
From 8.06€ *
UNIVERSAL
Tool for ARP Studs and Screws
Tool for ARP Studs and Screws
Internal multi-tooth socket for mounting ARP nuts and bolts. 12 square socket with 1/2 inch drive for tightening ARP nuts. This ARP tool is available in different sizes and is needed for the assembly of all ARP stud bolt and screws....
From 8.06€ *
1.8 & 2.0L TSI EA888 Gen.3 Adapter Boost Gauge BAR-TEK®
1.8 & 2.0L TSI EA888 Gen.3 Adapter Boost Gauge...
Adapter for mounting a boost pressure indicator on all 1.8L and 2.0L TSI EA888 engines of the third generation, e.g. in the Golf 7, Audi S3, Leon Cupra and many more. Easy installation on a free connection on the intake manifold. The...
Im Lager.
29.95€ *
1 From 3
  • The lubrication reduces friction and thus wear of the engine parts.
  • Moreover, the oil cools the components of an engine and protects them from overheating.
  • Noise and vibrations are noticeably dampened by the lubrication.
  • The oil protects the parts from corrosion.

We have various oil pumps for different car models in our shop. They include pumps for 1.8T, Polo 16V, G40 and G60, 2.0L and 2.5L TSFI engines. Numerous accessories are also available in our shop, e.g. chains for oil pumps, chain tensioners, etc.

Oil pump for all engine types

For the engine of your car to be well lubricated and all parts protected against wear and corrosion, replacing your oil pump is well worth the trouble. This way, you prevent nasty engine damage, because the pump ensures the supply of oil and an optimum pressure in the oil circulation.

You can buy our oil pumps for the following engines (list not complete):

  • VR6
  • 2.5L TFSI engines in the Audi TTRS and RS3
  • G60
  • G40
  • 1.8T
  • Polo 16V

We also have a 1.8T oil pump with 25 percent more displacement in the range, which supplies your engine with even more power.

2L TFSI kill kit – the super set

For the vulnerable balance shafts in the oil pan, we have the 2L TFSI kill kit in our range. The super set ensures far more engine performance, especially when accelerating. Thanks to the improved supply with engine oil, a stronger oil pump and less oil foaming, this kill kit is a true highlight. An oil cooler is also very easy to install.

Accessories for oil pumps

You´ll find a whole score of accessories for your oil pump and the entire vehicle oil circulation in our shop. We have chain wheels for the drive of the pump, chains, chain tensioners, the pulley high-performance kit with a reinforcement for the pulley and lots more.

If you need our help with choosing the right oil pump or if you can´t find the part you´re looking for, please contact us. We are glad to give you tips on tuning and everything it involves!

 

Viewed
Just pay
Logo Pre-Payment Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping