Accessories for fuel supply

For your car to run optimally, the fuel supply must be optimal as well. This is why we have lots and lots of professional accessories for the fuel pump, adapters, valves and tappets. You will certainly find what you are looking for here for giving your engine an upgrade.

Please contact us if you have any questions. We´ll tell you which accessories you need!

For your car to run optimally, the fuel supply must be optimal as well. This is why we have lots and lots of professional accessories for the fuel pump , adapters, valves and tappets. You will... read more »
Close window
Accessories for fuel supply

For your car to run optimally, the fuel supply must be optimal as well. This is why we have lots and lots of professional accessories for the fuel pump, adapters, valves and tappets. You will certainly find what you are looking for here for giving your engine an upgrade.

Please contact us if you have any questions. We´ll tell you which accessories you need!

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 2
TFSI Kraftstoffeinspritzventil Reparatursatz 2.0L TSI EA888 Fuel Injector Repair Kit
Injector o-rings are vital to ensure proper fuel delivery, so don't use old rings if removing and reinstalling injectors. This kit comes with all of the necessary o-rings to do one injector. The scope of supply includes the parts that...
19.95€ *
2.0L TFSI harness set for RS3 & TTRS Injector Kit BAR-TEK® 2.0L TFSI harness set for RS3 & TTRS Injector...
Harness set for RS3 and TTRS injection valves especially for the 2.0L TFSI engine for up to 500hp. The kit contains 4 pieces including adapter plugs Already new injectors have a certain dispersion of the injection quantity! The...
49.95€ *
Universal fuel hose 8mm GATES Universal fuel hose 8mm GATES
High quality universal fuel hose made by Gates. Inside ø 8 mm (5/16 inch) Sheathing is resistant to heat, oil, ozone and weathering Spiralized textile insert Resistant to operating pressure up to 1 MPa (10 kg / cm2) Temperature range...
Content 1 Laufende(r) Meter
7.95€ *
Submerged 044 Billet Surge Tank Submerged 044 Billet Surge Tank
Single surge tank design is essential on modified cars requiring higher fuel output, where effective scavenging is a must. This surge tank works inline with your current fuel system by filling up with fuel from the OEM in tank pump. The...
199.95€ *
Hint!
TURBO Amplifier PM4 for upgrade Fuel Pumps Torqbyte BAR-TEK® TURBO Amplifier PM4 for upgrade Fuel Pumps...
Turbo Controller for all low pressure fuel systems that run upgrade fuel pumps like Walbro, Bosch, DW or our BAR-TEK pumps. Features: Maintain full fuel pressure at any time No overheating of controller Works on all TFSI, TSI and MQB No...
899.95€ *
2.0L TFSI Pumpenstössel DLC beschichtet 2.0L TFSI Cam Follower DLC coated
DLC coated cam follower for all 2.0L TFSI engines. The cam follower is a high pressure suffering item in the TFSI engine. Our version is DLC coated to help againts this stress and to reduce wear. The cam follower should be checked often.
49.95€ *
G60 Kabelbaum für Eispritzdüsen BAR-TEK® G60 Cable set for Injectors BAR-TEK®
This cable set is failing very often due to the heat of the engine. The most cracks occure near the injector itself. Broken cables can make malfunction of the injectors and engine can run too lean and fail in the end! We build a new and...
119.95€ *
TFSI Kraftstoffeinspritzventil Reparatursatz TFSI Fuel Injector Repair Kit
Injector o-rings are vital to ensure proper fuel delivery, so don't use old rings if removing and reinstalling injectors. This kit comes with all of the necessary o-rings to do one injector. Please choose between our small and big kit....
From 9.95€ *
OE Fuel Pressure Regulator Housing OE Fuel Pressure Regulator Housing
Billet fuel pressure regulator housing for OE style fuel pressure regulators found in many Audi, BMW, and VW applications. You can easily adapt your factory regulator to an aftermarket fuel rail by using this housing. Once the FPR is...
59.95€ *
2.0L TFSI Upgrade Ventil für Kraftstoffsystem 2.0L TFSI Upgrade Relief Valve for fuel system
Upgrade Fuel system Relief Valve for the 2.0L TFSI engines running more than 300hp. The fuel system for the 2.0 TFSI separated in two systems: The low pressure system (3 to 5bar) is feeding the high pressure system (50 to 130bar). 2.0L...
79.95€ *
Einspritzdüsen Service @ BAR-TEK® Injector Service @ BAR-TEK
Professional Petrol fuel injector service and repair @ BAR-TEK. The only way to successfully test and diagnose a fuel injector is off the engine. Using our brand new Asnu (ASNU= As New) test and flowbench we can check the flow rates and...
From 29.95€ *
1.8 & 2.0L TSI Pumpenstössel Hochdruckpumpe 1.8 & 2.0L TSI EA888 Cam Follower high pressure...
1.8 & 2.0L TSI Cam follower for high pressure fuel pump. Putting high pressure fuel pump in your engine also the lifters should be replaced. The cam follower should be checked often. Fits 1.8 & 2.0L TSI EA888 engines with chain driven.
39.95€ *
2.5L TFSI Pumpenstössel Hochdruckpumpe 2.5L TFSI Cam Follower high pressure pump HPFP
2.5L TFSI Cam follower for high pressure fuel pump. Putting high pressure fuel pump in your engine also the lifters should be replaced. The cam follower should be checked often. Fits 2.5L TFSI engines as used in the Audi TTRS and RS3.
39.95€ *
Adapter von OEM Kraftstoff Steckleitung auf Dash6 SAE Quick Connect 5/16" Fuel Line -Dash6...
Make installation of -6AN lines to your factory hard lines a simple task. This innovative two-piece fitting clips together on the SAE quick connect 5/16"" factory hard line and threads together to create a tight fit. The SAE quick...
19.95€ *
2.0L TFSI Endstufe für TTRS Kraftstoffpumpe BAR-TEK® 2.0L TFSI Amplifier for TTRS Fuel Pump BAR-TEK®
2.0L TFSI Upgrade Amplifier made by BAR-TEK® for use TTRS Fuel Pump in 2.0L TFSI EA113 vehicles. This Amplifier was specially modified from us for correctly function of TTRS Fuel Pump in the 2.0L TFSI. We drive this Upgrade Amplifier in...
699.95€ *
Bosch 044 Ansaugfilter V1 BAR-TEK® Bosch 044 Inletfilter V1 BAR-TEK®
Bosch 044 Inlet Fuel Filter 60 microns BAR-TEK. Prefilter to filter the fuel before it enters the pump. The best solution if the Bosch 044 pump should be used as intank pump. Prevents that dirt from the tank can damage the pump. Fits...
29.95€ *
Kabel-Kit für Kraftstoffpumpen 30 Ampere BAR-TEK® 30 AMP Fuel Pump Wiring Kit BAR-TEK®
30 AMP Fuel Pump Wirining kit for all kinds of upgrade fuel pumps. If you upgrade your fueling system with a stronger fuel pump don´t forget the power supply! The OEM used cables are not sufficient enough to get current to the upgrade...
69.95€ *
Teflonband PTFE Teflon sealing tape PTFE
Teflon tape for usaged to seal different kinds of connections. Teflon tape should be used to seal water or fuel connections. We recommend to use the teflon tape for our fuel pressure manometer or the water cooling lines for the turbo...
2.95€ *
Benzindruckmanometer-Kit BAR-TEK® Fuel pressure Gauge Kit BAR-TEK®
Idealy together with the adjustable Fuelpressure Regulator. (FPR) After setting right pressure the gauge must be removed and be replaced by a nice small gold-looking plug. Includes: gauge, plug and adapter. Use Teflontape for proper...
29.95€ * 39.95€ *
Adapter mit Drehausgleich Dash 6 auf Dash 8 Aeromotive Swivel Adapter Dash 6 to Dash 8 Aeromotive
Swivel Adapter Dash 6 to Dash 8 by Aeromotive. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade...
39.95€ *
Benzindruckregler Montagekit G40 BAR-TEK® FPR Mounting-Kit G40 BAR-TEK®
Fuel pressure mounting Kit includes: Special VA Adaptor, High quality alloy Pipe, O-ring, 20cm Underpressure hose, For all G-40
29.95€ *
1.8T Bosch 044 Outlet Fitting to OE VW Connector 1.8T Bosch 044 Outlet Fitting to OE VW Connector
This fitting is used when installing a Bosch 044 fuel pump in place of the factory fuel filter on the 1.8T engine with MK4 and A3 8L chassis. It will allow you to directly replace the fuel filter with the inline 044 pump and relocate the...
9.95€ *
1.8T Bosch 044 Inlet Fitting to OE VW Connector 1.8T Bosch 044 Inlet Fitting to OE VW Connector
This fitting is used when installing a Bosch 044 fuel pump in place of the factory fuel filter on the 1.8T engine with MK4 and A3 8L chassis. It will allow you to directly replace the fuel filter with the inline 044 pump and relocate the...
9.95€ *
Hose Barb Fitting Dash 6 or Dash 8 Hose Barb Fitting Dash 6 or Dash 8
These unique fittings feature a -8 AN or -6 AN o ring boss port on one end, and a 5/16 (8mm) on the other end. More Infos about our Test RACE Golf here
9.95€ *
1 From 2

Accessories for the fuel pump

The fuel pump supplies the car with the necessary gas and constitutes the very core of every passenger car. It ensures sufficient pressure and corresponding performance. To make sure it remains this way, we developed, for example, an upgrade for the 2.0L TFSI amplifier. It was rebuilt by us in such a way that you can easily fit the 2.5L TFSI TTRS fuel pump.

Our gasoline pump holder by Sytec keeps your fuel pump exactly where it belongs. It was specially developed for car racing and guarantees optimum weight and durability. The holder is made of CNC-milled, blue-anodized aluminum and comes wrapped in protective foam to prevent vibrations.

The pump tappet for the high-pressure pump must withstand extreme conditions and very high pressure. Therefore it tends to wear quickly. Our DLC-coated pump tappet for 2.0L TFSI engines, like the coating itself, is used in Formula 1 and can cope with a corresponding amount of stress.

Optimum fuel supply for tuned vehicles

For highly tuned vehicles and use in car racing, it is recommended to install a gasoline catch tank. This tank guarantees constant gasoline pressure and permanent supply of fuel. We have catch tanks for a Bosch 044 gasoline pump (suitable for up to 650 hp) and for two 044 gasoline pumps by Bosch (suitable for up to 1200 hp). With their compact design, they don´t require the installation of additional connections and lines between the pump and the tank; and thanks to this splendid system, there are fewer connections that can leak. The series tank fills the catch tank by means of the original gasoline pump. This means that the pump is always sufficiently supplied with gas. The slight overpressure in the catch tank prevents the Bosch 044 pumps from running dry. The catch tank comes with accessories, among them a red anodized pump bracket, mounting lugs with rubber dampers, O-rings and screws.

You can't see the forest for the trees?

Contact us if you get stuck. We are always glad to help in all questions relating to tuning.

Viewed
Just pay
Logo Vorkasse SLogo ofort Überweisung Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL Ratenkauf by easyCredit
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping