G-Supercharger

Here you can find all products for the VW G-Lader.
This Supercharger can run long life if original VW parts are used. We are the only existing company left that is selling 100% original VW parts for the G-Lader. If G40 or G60 Supercharger, they can be performed with best parts from BAR-TEK.

Here you can find all products for the VW G-Lader. This Supercharger can run long life if original VW parts are used. We are the only existing company left that is selling 100% original VW parts... read more »
Close window
G-Supercharger

Here you can find all products for the VW G-Lader.
This Supercharger can run long life if original VW parts are used. We are the only existing company left that is selling 100% original VW parts for the G-Lader. If G40 or G60 Supercharger, they can be performed with best parts from BAR-TEK.

Close filters
 
  •  
  •  
  •  
  •  
  •  
from to
1 From 4
displacer welding for all G-Supercharger displacer welding for all G-Supercharger
Broken displacers are repaired by us professionally. Damage is poured out, welded and then milled and ground flat. This creates a seamless new surface. The cost of a repair depends on the extent of the damage, so we can not quote a flat...
99.95€ *
18mm Riemen GATES 18mm belt GATES
18mm strong reinforced belt for Superchargers with bigger wheels. This is only the belt. Not a set together with bigger wheels!
29.95€ *
G-Lader Überholung mit RS1 Bearbeitung BAR-TEK® G-Lader FULL Rebuild with RS1 Modification...
We do an overall supreme Rebuild of Your Lader with 100% oem VW parts! 1) disasamble, full cleaning and a good check of inner parts. 2) Change all 5 bearings to original FAG/Torrington. 3) 5 New Oilseals original VW-Goetze! 4) 8...
699.95€ *
G60 G-Lader Ölanschluss Edelstahl BAR-TEK® G60 G-Lader Oil return line fitting BAR-TEK®
New oil return flange that fits in the G60 Block. Oil return from G60 G-Lader back to the sump. Also perfekt for 16VG60 conversions, as if other blocks are used like KR or ABF, these blocks do not have the fitting installed. Not...
19.95€ *
16VG60 Lichtmaschinenhalter-Kit BAR-TEK® 16VG60 Alternator Mounting-Kit BAR-TEK®
16V-G60 Alternator mounting kit for the famous 16VG60 conversion. New design. Can be mounted with engine in car. No problems with Alternator vibration anymore. This version is for the KR, PL or AE block. Pls choose what type of engine...
139.95€ *
G-Lader Dichtsatz G60 beige Dichtleisten GOETZE Ringe G60 Lader FULL Service-Kit beige colour stripes...
100% original VW parts! We are the only supplier for Götze oil seals worldwide! All parts wich You need for a complete Rebuild of the G-60 Supercharger. This are Only Original Parts! 8 Sealstrips: ready cutted "beige" colour original VW...
369.95€ *
Radialwellendichtringe original VW GOETZE Oilseals original VW GOETZE
5 Shaft Oil Seals from the original VW supplier Goetze! Only this Seals are used in ALL New Superchargers! On the seals is the orig. VW and Goetze-Logo. BAR-TEK is the only left supplier of these oilseals worldwide! Made in germany.
189.95€ *
G60 Schwungrad erleichtert Lighter Flywheel G60
Modified and ballanced Flywheel for all G-60 Modells. Weight after modification approx. 6,5 kg. NEW flywheel, finished machined, balanced and with a new starter wheel. No exchange needed. (Pic shows different flywheel) Made in germany...
99.95€ *
G60 Auslassbogen Dichtplatte BAR-TEK® G60 Gasket for outlet-pipe BAR-TEK®
Gasket for outlet pipe G60 Lader big intercooler. Also for Rally Golf intercooler. Non rosting steel. 100% same design compared to VW.
39.95€ *
16VG60 Gaszug 16VG60 throttle cable
New throttle cable for the famous 16VG60 conversion. The cable is long enough and an OEM VW part.
59.95€ *
G60 16V Chip G60 16V Chip
BAR-TEK Chip for 16VG60 engines. Please choose from following configurations: Chip V1: 70-72mm pully max. 1bar boost Grey G60 Injectors Big intercooler Chip V2: 65-68mm pully max. 1.3bar boost Grey G60 Injectors Big intercooler Camshaft...
From 199.95€ *
G60 RS Chip G60 RS Chip
Our special tuning Eprom for VW G60 engines. Please choose from following configurations: Chip V1: 68-70mm Pully max. 1bar boost Green G60 Injectors Chip V2: 62-65mm Pully max. 1.1bar boost Green G60 Injectors Schrick camshaft Chip V3:...
199.95€ *
G60 RS3 Chip G60 RS3 Chip
Our special RS 3 Eprom for G-60. The software is for following hardware configurations: Pully 72mm asym. Schrick Camshaft Adjustabel fuel pressure regulator BAR-TEK® big intercooler Kit modified G-Lader Other configurations on request....
199.95€ *
G60 RS Chip für Siemens Steuergerät G60 RS Chip for Siemens ECU
Our special tuning Eprom for VW G60 engines with Siemens ECU. The software is for following hardware configurations: 68-70mm Pully max. 1bar boost Green G60 Injectors Please send your ECU to us after purchase. Other configurations on...
249.95€ *
G60 Zahnriemenantrieb BAR-TEK® G60 tooth belt drive BAR-TEK®
The tooth belt drive was invented by VW Motorsports for the Rally Sport. No pressure lost anymore due to belt slip No loss of power, less loss of drive Better supercharging pressure build up Increase of Boost approx. 0.2bar Incredible...
From 389.95€ *
G60 G-Lader Einlasstutzen BAR-TEK® G60 G-Lader Einlassstutzen BAR-TEK®
Universalflansch für alle G60 Lader. Wird einfach anstelle des originalen Schlauchs montiert. Dadurch können alle verschiedenen Luftfilter Systeme angebaut werden. Aussenmaß: 75mm Inklusive passender Stehbolzen und Muttern. (Kein...
34.95€ *
16VG60 Spezial Zündkerzen NGK 16VG60 Special Spark plugs NGK
Special Platin Iridium spark plugs for the 16VG60 engine. Also suitable for the genuine engine from VW Motorsport. (Pic shows different version)
99.95€ *
RS 2 Bearbeitung G-Lader BAR-TEK® RS 2 Modification G-Lader BAR-TEK®
Enlargement and smoothing of the air tracts of a max. Optimized displacer, ported inlet and outlet to a max bench tested for increased throughput. Boost increase, approximate full spectrum 20 PS Only possible together with rebuild of...
999.95€ *
16VG60 Einspritzleiste kurz BAR-TEK® 16VG60 Fuel rail short BAR-TEK®
This fuel rail fits perfect on our special intake manifold for a 16VG60 conversion. Made from non rosting high end steel. Fittings included. (sizes are M12x1,5 and G1/4")
139.95€ *
16VG60 Wasserflansch 16VG60 Water flange
Water flange for 16V-G60 conversion. Fits on the Cylinder head. Easy to install.
25.95€ *
16V Spezial Ansaugbrücke Kurz BAR-TEK® 16V Special Intake Manifold BAR-TEK®
16V Short runner intake manifold for Turbo or 16VG60 conversion. -Quicker boost spool up. -More HP and torque -Cooler air intake The small ports have following threads: ½ NPT and ½ 20 UNF
249.95€ *
Einstellbarer Riemenspanner für ZAHNRIEMENANTRIEB BAR-TEK® Adjustable Belt tensioner for TOOTHED BELT...
Thread belt tensioner for our toothed belt kit G60 and 16VG60. This belt tensioner is continuously adjustable to the correct preload of the belt. Only for our toothed belt kit! For Pully sizes 60mm, 65mm and 70mm Black coated for OEM...
59.95€ *
G60 Auslassbogen 180° BAR-TEK® G60 Outlet pipe for big intercooler BAR-TEK®
Outlet pipe from G-Lader to big intercooler. Also for Rally intercooler suitable. Including 2 bolts and washers. Gasket between G-Lader and this pipe can be ordered seperatly.
119.95€ * 149.95€ *
G60 Golf1 Druckrohr Sprinter Ladeluftkühler G60 Golf MKI boost pipe for Sprinter intercooler
Pressure tube in 60mm polished aluminum for mounting the Sprinter intercooler in conjunction with the G60 engine in Golf 1. Connecting pipe from the Sprinter LLK to the engine. For space reasons, this tube must have special dimensions in...
49.95€ * 89.95€ *
1 From 4
  • Golf
  • Passat
  • Sharan
  • Vento.

The performance kits range from 20 hp extra performance up to a whopping 500 hp. Once we even achieved 1000 hp with a VR6! For that kind of increase in performance, we have in our online shop the complete hardware and, of course, the perfectly matched chip tuning for your VR6. Installation can be done at our place: Simply request it by phone or e-mail.

Tuning kits for VR6 engines

Our tuning kits for the VR6 come in two levels. An increase in performance of up to 30 hp is possible, which already puts a good deal on the road here.

Kit 1 comes with a fresh K&N air filter, optimized spark plugs and, of course, matching chip tuning. With it, you can achieve extra performance of up to 20 hp. The air filter by K&N keeps the air nice and fresh for your engine and ensures that dust cannot penetrate into the interior. You can very easily replace it since it fits in the existing air filter box. The optimized spark plugs provide improved acceleration. And the chip tuning completes the package. In addition to the parts from kit 1, performance kit 2 contains two sports camshafts for more torque and performance. With it, you can reach up to 30 hp.

VR6 turbo kit for a whopping 500 hp

This turbo kit is made for real fans of VR6 tuning and is based on our own tests and conversions. 500 hp is possible with it – we even got to 1000 hp once. Our turbo kit for VR6 engines includes no fewer than 22 parts: the Garrett GT(X) 30/76 turbocharger, special spark plugs, lines and hoses, turbo clamps, a Bosch 004 fuel pump, chip tuning and lots more. We can also install this ultimate racing package for you.

Ask us if you are interested in even more output. We offer conversions for up to 1050 hp. And we are glad to share our knowledge and advise you on engine tuning!

Viewed
Just pay
Logo Vorkasse SLogo ofort Überweisung Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL Ratenkauf by easyCredit
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping