Bearings for G-Laders

The bearing is an essential part of your G-Lader since it is responsible for power distribution and rotation. At the same time, the G-Lader bearings are vulnerable wear parts that ought to be checked for functionality at regular intervals. The following must be borne in mind: An overhaul of the G-Lader is far cheaper than a repair in the event of damage. This is why you should always have an eye on the G-Lader. You get all the bearings relevant for your G-Lader here.

  • Bearing for beside-shaft
  • Bearing kits
  • Needle bearing
  • Main bearing

Many tuning fans tend to avoid replacing all bearings, if only for reasons of cost. In addition, you need special tools for it. If you have us do the overhaul, you’ll benefit from our twelve-month warranty, since we measure all the parts of the G-Lader precisely and clean them. In so doing, all five bearings are also replaced. This is the only way to prolong considerably the service life of your G-Lader!

The bearing is an essential part of your G-Lader since it is responsible for power distribution and rotation. At the same time, the G-Lader bearings are vulnerable wear parts that ought to be... read more »
Close window
Bearings for G-Laders

The bearing is an essential part of your G-Lader since it is responsible for power distribution and rotation. At the same time, the G-Lader bearings are vulnerable wear parts that ought to be checked for functionality at regular intervals. The following must be borne in mind: An overhaul of the G-Lader is far cheaper than a repair in the event of damage. This is why you should always have an eye on the G-Lader. You get all the bearings relevant for your G-Lader here.

  • Bearing for beside-shaft
  • Bearing kits
  • Needle bearing
  • Main bearing

Many tuning fans tend to avoid replacing all bearings, if only for reasons of cost. In addition, you need special tools for it. If you have us do the overhaul, you’ll benefit from our twelve-month warranty, since we measure all the parts of the G-Lader precisely and clean them. In so doing, all five bearings are also replaced. This is the only way to prolong considerably the service life of your G-Lader!

Close filters
 
  •  
from to
Nadellager Verdränger G60 Torrington Bearing Displacer G60 Torrington
Original Torrington bearing for the G60 Supercharger. This bearing sits in the displacer od each G60 G-Lader and should be replaced at certain time to avoid damage to the G60 Supercharger. The G60 displacer bearing is the most critical...
69.95€ *
RS Lager Kit G40 RS bearings kit G40
5 bearings RS for all G40 charger.
99.95€ *
RS Lager Kit für G60 Lader RS bearings kit G60 charger
5 bearings RS for all G60 Lader.
119.95€ *
Lagersatz G40 G-Lader Bearing-Kit G40
5 Bearings from the original supplier FAG. The bearing for the displacer is from Torrington.
103.95€ *
Lagersatz G60 G-Lader G60 Bearing-Kit
SPECIAL OFFER!!! 5 Bearings from the original supplier FAG. The bearing for the displacer is from Torrington.
119.95€ *
Nadellager Verdränger G40 INA Bearing Displacer G40 INA
Bearing for the G40 Supercharger. This bearing for the G40 displacer is the most worn bearing, because it has to move in a excentric way together with the displacer. This bearing sits in the displacer. Made in germany.
19.95€ *
Lager 6304 TVH FAG Bearing 6304 TVH FAG
Main bearing in inlet casting original FAG for G40 and G60. Newest spec with composite basket. Look out for installing position: basket has to show to displacer!
18.95€ *
Lager NU202 original FAG NU 202 Bearing original FAG
Bearing NU202 FAG for outletside case G40 and G60. Some Tuner don`t replace this bearing due to the fact that it`s expensive, not easy to get and difficult to remove. (special tools are needed) We highly recommend to replace ALL bearings...
49.95€ *
Lagersatz Nebenwelle FAG original Bearings kit for beside-shaft original FAG
2 bearings for Beside-shaft original FAG for G40 and G60. We highly recommend to replace this bearings during a rebuild!
19.95€ *

Extra Performance With a Working G-Lader

The G-Lader ensures that the pressure in the inlet pipe is increased and correspondingly more fuel-air mixture is processed. This increases the average working pressure, enhancing the performance of the engine considerably. This is why, in tuning, the G-Lader is a good starting point for optimization. For the G-Lader to work smoothly and for you to be able to use the entire performance potential, all parts, and especially the bearings of the G-Lader, must be serviced regularly.

Why Would You Want to Replace All the Bearings?

All G-Lader bearings are exposed to a certain amount of wear, some more, some less. Nonetheless, you should replace all five bearings during an overhaul. This is the only way to guarantee a long service life of your G-Lader. The needle bearing for the displacer, for example,wears down very fast, since it must withstand the eccentric movements of the displacer. If you want to be on the safe side and implement a proper overhaul, you should fall back on a complete bearings kit. We have kits by FAG for the G60, for example.

Contact our team if you have questions. You can reach us by phone and by e-mail!

Viewed
Just pay
Logo Vorkasse SLogo ofort Überweisung Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL Ratenkauf by easyCredit
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping