G40 Supercharger

Close filters
from to
Breiter Riemen G-Lader Extra wide belt for all G40/G60
Reinforced belt from the original supplier Gates for all G-Supercharger. Extra wide 11mm does fit without any modification needed, Plug & Play for all G40 or G60 G-Laders.
9.95€ * 12.95€ *
Dichtleisten-Satz beige Sealstrips-Kit NEW Spec. all Superchargers
8 original VW Sealstrips beige color suitable for all G40 and G60 G-Lader. These Sealstrips are like the original NEW Spec used since 1993 in all new G-Superchargers. Made in germany.
99.95€ *
G60/G40 & 16VG60 Laderrad Zahnriemenantrieb HTD G60/G40 & 16VG60 Pully toothed belt HTD
Increases the revs of the G-Lader. More boost and Horsepower! Steel version coated. Also for 16VG60 Following sizes possible: 60 or 65mm Aluminium spacer for pully not included. Please order seperately.
49.95€ *
Zufuhr-Ölleitung G-Lader Feeding-Oilhose G-Supercharger
Oilfeeding high pressure hose for G40 or G60. After a G-Lader failure you should replace also this oilpipe. The oil feed can be blocked inside the oil line. If in doubt please replace to this new one. This is cheaper than to replace the...
49.95€ *
Dichtleisten-Satz grau Sealstrips-Kit grey
8 Sealstrips grey color. This are the same sealstrips which has been used original from VW since 1993 . Including one extra wide belt! For all Superchargers G40 or G60.
109.95€ *
2 Verdränger-Wellendichtringe für den G-Lader BAR-TEK® 2 Oilseals for Displacer from BAR-TEK®
2 Oilseals for the displacer from BAR-TEK® for all G40 and G60 G-Lader. Sooner or later there will not be anymore original Goetze oilseals, so we decided to develop own ones. This seals are much more cheaper than the orig. ones with same...
39.95€ *
Dichtleisten-Satz beige + Riemen Sealstrips-Kit NEW Spec. all Superchargers + belt
8 Sealstrips beige color with wider Gates belt! These Sealstrips are like the original NEW Spec used since 1993 in all new G-Superchargers. Including one extra wide belt original Gates. For all G40 and G60 Superchargers. Made in germany.
119.95€ *
RS Lager Kit G40 RS bearings kit G40
5 bearings RS for all G40 charger.
99.95€ *
G-Lader Dichtsatz G40 beige Dichtleisten BAR-TEK® G40 Lader FULL Service-Kit beige BAR-TEK®
All parts wich You need for a complete Rebuild of the G-40 Supercharger. 8 Sealstrips: ready cutted "beige" colour original VW since 1993 5 Shaft Oil seals BAR-TEK® 5 Bearings: Suppliers FAG and Torrington 1 Extra wide belt: reinforced...
295.95€ *
Kleiner Dichtsatz G40 beige Dichtleisten BAR-TEK® G40 Lader Small Service-Kit beige BAR-TEK®
This is the same Kit as the complete Service-Kit only without the bearings. With new spec. sealstrips colour "beige" colour and our NEW developed BAR-TEK® Oilseals. Attention: We deliver only the parts which we mention in the list and...
195.95€ *
Lagersatz G40 G-Lader Bearing-Kit G40
5 Bearings from the original supplier FAG. The bearing for the displacer is from Torrington.
105.95€ *
Nadellager Verdränger G40 INA Bearing Displacer G40 INA
Bearing for the G40 Supercharger. This bearing for the G40 displacer is the most worn bearing, because it has to move in a excentric way together with the displacer. This bearing sits in the displacer. Made in germany.
19.95€ *
G-Lader Ölleitungs-Satz komplett G-Lader Oilhoses-Kit complete
G Supercharger oil feeding high pressure hose and returning pipe with all parts. After a G-Lader failure you should replace also the old oilpipes to this new Kit. LATEST ALL 3 years! All parts includet like on the pic except hose clamps....
79.95€ *
VA-Schrauben Satz G40 Lader VA-Bolts-Kit G40 Lader
6 Bolts with Washers made of high quality non rosting stainless steal. For all G-40 Lader.
13.95€ *
NEU Wellendichtringe G-Lader BAR-TEK® NEW Oilseals from BAR-TEK®
NEW Olseals for the G40 or G60 G-Lader BAR-TEK® Same material and measurement as the original Goetze VW oilseals. Sooner or later there will be no original Goetze oilseals anymore available! Made in germany.
99.95€ *
Lager 6304 TVH FAG Bearing 6304 TVH FAG
Main bearing in inlet casting original FAG for G40 and G60. Newest spec with composite basket. Look out for installing position: basket has to show to displacer!
19.95€ *
Lager NU202 original FAG NU 202 Bearing original FAG
Bearing NU202 FAG for outletside case G40 and G60. Some Tuner don`t replace this bearing due to the fact that it`s expensive, not easy to get and difficult to remove. (special tools are needed) We highly recommend to replace ALL bearings...
49.95€ *
Lagersatz Nebenwelle FAG original Bearings kit for beside-shaft original FAG
2 bearings for Beside-shaft original FAG for G40 and G60. We highly recommend to replace this bearings during a rebuild!
19.95€ *
G-Lader Hohlschrauben G-Lader Banjo bolts
2 Banjo bolts with 4 new copper washers. Always use new copper washers and do not torque the banjo bolts to much, otherwise they can crack! Made in germany.
9.95€ *
Just pay
Logo Vorkasse Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL Ratenkauf by easyCredit
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping