Tools for professional engine tuning

In our "tools" category, ambitious engine whizzes and tuning freaks are provided with everything they need for measuring, installing, tensioning, locking and inserting parts. With it, professional tuning will also be a great success at home in your own garage! In our shop, we have the right tools for all car brands and all parts: Audi, VW, Ford, Porsche and many others.

In our "tools" category, ambitious engine whizzes and tuning freaks are provided with everything they need for measuring, installing, tensioning, locking and inserting parts. With it,... read more »
Close window
Tools for professional engine tuning

In our "tools" category, ambitious engine whizzes and tuning freaks are provided with everything they need for measuring, installing, tensioning, locking and inserting parts. With it, professional tuning will also be a great success at home in your own garage! In our shop, we have the right tools for all car brands and all parts: Audi, VW, Ford, Porsche and many others.

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 5
NEW
UNIVERSAL
Titanium distillate 150ml BAR-TEK®
Titanium distillate 150ml BAR-TEK®
The BAR-TEK® Titanium Distillate is our latest development in the field of corrosion protection, rust solution and preservation. The distillate is applied to the material to be protected and creates a protective film, which immediately...
79.95€ *
NEW
UNIVERSAL
Back-up tool for flywheel like VAG VW 3067
Back-up tool for flywheel like VAG VW 3067
With the counter-holder for the flywheel you'll ease the assembly or disassembly enormously. No complicated holding back anymore. Simple and clean. Article also comparable to the original tool number of: VW 3067 The original reference...
29.95€ *
UNIVERSAL
Vacuum valve tester electric BAR-TEK®
Vacuum valve tester electric BAR-TEK®
Tool for testing the tightness of valves. Leakage at the valves leads to rough running of the engine and in the worst case to engine damage. To prevent damage to the engine, we recommend that you regularly check the valve train for...
Nur noch 1 Stück im Lager.
799.95€ *
Piston ring file for gap clearance, ring clearance V2 BAR-TEK®
Piston ring file for gap clearance, ring...
Tool for adjusting the piston ring gap clearance / ring clearance. Finally available! The further development of our V1 piston ring file. When building engines, good tools are essential to achieve precise results. Especially the area...
Im Lager.
189.95€ *
UNIVERSAL
Precision feeler gauges, 0.05 - 1.00 mm, 20 sheets
Precision feeler gauges, 0.05 - 1.00 mm, 20 sheets
Feeler gauge with locking screw and 20 blades in a thickness of 0.05 to 1.00 mm. The blades have a length of 100 mm. Optimal for measuring piston ring clearance, electrode gap of spark plugs and much more. Here is a video tutorial on the...
Im Lager.
8.95€ *
UNIVERSAL
Brake piston retainer universal BAR-TEK®
Brake piston retainer universal BAR-TEK®
Tool for resetting the brake piston The brake piston resetting tool makes it easy to reset the brake piston with a twisting motion, for example to install new brake pads. Features & specifications: Clamping range 0-65 mm Easy operation...
Nur noch 2 Stück im Lager.
14.95€ *
UNIVERSAL
Compression Tester, Compression Tester BAR-TEK®
Compression Tester, Compression Tester BAR-TEK®
The compression tester allows a simple measurement of the Compression pressure of your engine in just a few seconds. The pressure gauge has a double scale with a measuring range of 0 - 20 bar and 0 - 300 psi 20 Bar and 0 - 300 Psi The...
Nur noch 2 Stück im Lager.
27.95€ *
UNIVERSAL
Three-square full scraper for deburring BAR-TEK®
Three-square full scraper for deburring BAR-TEK®
High quality tool for removing burrs High quality manufactured tool with wooden handle and special steel blade. Features & Specifications High quality wooden handle Blade length 100 mm Total length 200 mm Made in Germany DIN 8350 standard
Nur noch 4 Stück im Lager.
19.95€ *
UNIVERSAL
Gasket scraper Gasket remover Flat scraper BAR-TEK®
Gasket scraper Gasket remover Flat scraper...
Scraper for removing sealing residues High-quality manufactured scraper for removing seal residues, adhesive residues and much more. The scraper is made of high quality stainless steel to ensure that a long life is guaranteed....
Nur noch 5 Stück im Lager.
12.95€ *
UNIVERSAL
Abrasive fleece for removing sealing residues BAR-TEK®
Abrasive fleece for removing sealing residues...
Abrasive fleece with optimum grain size for removing seal residues. The abrasive fleece can be used, for example, to remove seal residues. When using the abrasive fleece, this only removes impurities and protects the surface of the...
Im Lager.
1.95€ * 3.95€ *
Hint!
UNIVERSAL
Tool for setting the electrode gap in spark plugs BAR-TEK®
Tool for setting the electrode gap in spark...
Our tool is used to correctly adjust the electrode gap. The BAR-TEK® tool differs from other commercially available tools in that it adjusts the electrode gap continuously. Also, the tools on the market are threaded, our tool is...
Im Lager.
79.95€ * 89.95€ *
UNIVERSAL
Mounting sleeve for DQ500 DSG gearbox VAG T10459
Mounting sleeve for DQ500 DSG gearbox VAG T10459
The sleeve is needed to mount the clutch cover on the 0BT and 0BH, MYD, NFA, NYF, NZV or DQ500 transmission. Original VW T10459
Nur noch 4 Stück im Lager.
24.95€ *
UNIVERSAL
Transmission cover for DQ250 DSG transmission
Transmission cover for DQ250 DSG transmission
Clutch cover for all 02E and DQ250 gearboxes - with integrated oil seal. Tool T10302 is required for assembly.
54.95€ *
UNIVERSAL
Mounting sleeve for DQ250 DSG gearbox VAG T10302
Mounting sleeve for DQ250 DSG gearbox VAG T10302
The sleeve is needed to mount the clutch cover on the 02E or DQ250 transmission. Original VW T10302
Nur noch 2 Stück im Lager.
14.95€ *
UNIVERSAL
Oil drain thread / oil drain plug repair set M14x1,5
Oil drain thread / oil drain plug repair set...
Repair kit to drill out broken threads of the oil drain plug from M14x1,5 to oil drain plug M15x1,5. So it is no longer necessary to replace the whole oil pan. Included in the set: 1 tap HSS-G 6 spare screws M15x1,5 (head 19mm) 6 sealing...
Nur noch 2 Stück im Lager.
14.95€ *
UNIVERSAL
Mounting sleeve for piston BAR-TEK®
Mounting sleeve for piston BAR-TEK®
Professional tool for easy and above all safe mounting of piston in the engine block. The sleeve is simply placed on the engine block over the cylinder. The piston is then pushed into the cylinder by lightly tapping it through the...
39.95€ * 49.95€ *
UNIVERSAL
Präzisionsmessuhr 10mm, Außendurchmesser 60mm
Präzisionsmessuhr 10mm, Außendurchmesser 60mm
Spezialwerkzeug zum Messen und Prüfen von z.B. Ventilführungen, Ausgleichswellen einstellen, Axialspiel von Kurbelwelle und Nockenwelle. Werkzeug DIN 878. Lieferumfang: 1 x Messuhr wie VAS6079 Die Original-Vergleichsnummern dienen nur...
Nur noch 4 Stück im Lager.
34.95€ *
UNIVERSAL
Lacquer Edding 1000°C Glass, Metal, Plastic
Lacquer Edding 1000°C Glass, Metal, Plastic
Edding Lack 750 Creative Glass, Metal, Plastic The Edding is ideal for writing on almost any material, even heat up to 400(*1000°C) and the 750 Creative paint marker can withstand the elements. Features and specifications: 2-4mm marking...
From 5.95€ *
Pneumatic pen/engraver BAR-TEK®
Pneumatic pen/engraver BAR-TEK®
The engraving pen has a very high frequency, which can be infinitely adjusted. This makes it very pleasant to write on a wide variety of materials. Examples of use: Steel, bronze, alloys, copper. The engraving pen also writes on V2A and...
235.95€ *
UNIVERSAL
Thread repair kit, thread insert like Helicoil BAR-TEK®
Thread repair kit, thread insert like Helicoil...
For the repair of defective or torn out threads. All necessary tools are included in this set: one 1 HSS twist drill 1 HSS tap for threaded inserts 1 tang breaker 1 screwdriver for threaded inserts M5 x 0.8 mm 20 threaded inserts M5 x...
From 25.95€ *
UNIVERSAL
Oil cooler flange mounting tool BAR-TEK®
Oil cooler flange mounting tool BAR-TEK®
This tool is required to fasten the oil cooler screw to the oil cooler flange.
Im Lager.
9.95€ *
UNIVERSAL
Pliers for stainless steel cable ties BAR-TEK®
Pliers for stainless steel cable ties BAR-TEK®
Pliers for stainless steel cable ties BAR-TEK® Tool for easy clamping and cutting of stainless steel cable ties. Ideally suited for tensioning heat protection tape around the elbow. Features & Specifications: Suitable for clamping and...
Noch 10 Stück im Lager.
59.95€ * 69.95€ *
UNIVERSAL
Assembly wedge for trim strips like VW 3409
Assembly wedge for trim strips like VW 3409
Mounting wedge made of robust plastic, especially for work on panelling, dashboard, trim strips, door trim. Enables non-destructive assembly of sensitive parts. The original reference numbers are for identification purposes only, it is...
Noch 8 Stück im Lager.
9.95€ *
UNIVERSAL
VAG V6 & V8 locking tool crankshaft as VAG 3242
VAG V6 & V8 locking tool crankshaft as VAG 3242
Adjusting tool or locking pin for the crankshaft for V6 and V8 diesel and petrol engines. Required when replacing the water pump, timing belt, tensioner pulley, idler pulley, cylinder head repairs, engine repairs, etc. Reference numbers:...
Nur noch 1 Stück im Lager.
9.95€ *
1 From 5

If you´re looking for a special part, please contact us. We can help you with this!

Locking tools

If you want to work on the control times of your Audi RS3, for example, you need the 2.5L TFSI locking tool for camshafts by Integrated. With this tool, you can set the camshaft in the upper dead center and direct your attention to the control times. The tool comes with the screws.

Digital valve spring tester by Computerscales

With the valve spring tester by Computerscales, you can check each valve spring for its spring force and length. The digital display has a scale of 0 to 700 kg and provides precise results: It measures the spring pressure and travel down to 0.1%. Owing to the extra long arm, checking high-pressure springs will also be quite easy.

Perfect angle measuring of conrods

We angle-measure your conrods for you! In order to avoid piston or cylinder bore wear, we angle-measure your conrods for you. They will be precisely measured, aligned and checked for exact parallelism. We have summarized all important information for you, so nothing bad can crop up during the installation.

Torque plate for all VW VR6 cylinder blocks

With this torque plate, the installation of a cylinder head can be simulated when drilling and honing the cylinders. It is mounted on the block and tightened. This distorts the block in the same way as it would with a mounted cylinder head and under normal driving conditions. With this, you can create a perfectly round hole for your piston. We use this torque plate for all our racing engines. By the way, you can lease it from us!

Tools for turbochargers

You´ll find our special tools for turbos at: Installation material.

There are brackets and bolts and clamps for the installation of the exhaust housing.

Other car accessories and tips from BAR-TEK

Many, many more car accessories are ready for you in our online shop. And we are always glad to help if you have any questions. Just contact us!

Viewed
Just pay
Logo Pre-Payment Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping