Mounting parts

Close filters
 
  •  
  •  
  •  
  •  
from to
4.0L TFSI Audi RSQ8 & Lamborghini Urus Turbocharger Mounting Kit
4.0L TFSI Audi RSQ8 & Lamborghini Urus...
Assembly and gasket kit for a turbocharger in your 4.0L TFSI EA825 engine such as installed in the RSQ8, Cayenne or Urus. Contains all necessary parts to mount the supercharger. We recommend replacing the gaskets every time you...
249.95€ *
UNIVERSAL
Turbocharger Oil Return line Dash 10 BAR-TEK®
Turbocharger Oil Return line Dash 10 BAR-TEK®
High quality turbocharger oil returnline for installing a custom turbocharger, for example in Polo G40, G60, 1.8T, VR6, TFSI, 16V and many more. The oil line consists of a synthetic rubber layer, a steel layer and an outer nylon...
Im Lager.
59.95€ *
Turbocharger Oil Inlet Line BAR-TEK®
Turbocharger Oil Inlet Line BAR-TEK®
High quality turbocharger oil inlet line for the installation of a turbocharger, for example in the Polo G40, G60, 1.8T, VR6, TFSI, 16V and many more. The oil lines with Teflon core (extremely temperature resistant) is one meter long and...
39.95€ *
2.5L TFSI Audi RS3 & TTRS Turbocharger Mounting Kit BAR-TEK®.
2.5L TFSI Audi RS3 & TTRS Turbocharger Mounting...
Turbocharger mounting and gasket kit for your 2.5L TFSI EA855evo engine like RS3, TTRS or RSQ3. Contains all necessary parts to mount the turbocharger. We recommend replacing the gaskets every time you disassemble or reassemble. Among...
Nur noch 4 Stück im Lager.
55.95€ *
5.2L FSI Audi R8 Gen.2 & Lamborghini Huracan V10 Secondary pumps Block-off Plates
5.2L FSI Audi R8 Gen.2 & Lamborghini Huracan...
These connection plates are used to close the connection for the Secondary Pumps on the cylinder heads. Suitable for all 5.2L FSI V10 engines in the Audi R8 and Lamborghini Huracan 6061 aluminum alloy plates, CNC machined and red anodized.
49.95€ *
1.8L & 2.0L TSI EA888 Gen.3 MQB Turbocharger mounting Kit
1.8L & 2.0L TSI EA888 Gen.3 MQB Turbocharger...
Turbocharger assembly and sealing kit for all 2.0L TSI engines as used in Golf 7 GTI, S3 und Golf 7 R and many more. Contains all required parts for mounting the loader. Stud bolt + nuts downpipe Stud bolts + nuts exhaust manifold Gsaket...
Im Lager.
19.95€ * 24.95€ *
2.0L TFSI & TSI Turbocharger mounting Kit
2.0L TFSI & TSI Turbocharger mounting Kit
Turbocharger assembly and sealing kit for all 2.0L TFSI & 2.0L TSI engines of the second generation as used in Golf 5 GTI, Golf 6 GTI, S3 und Golf 6 R and many more. Contains all required parts for mounting the loader. Stud bolt + nuts...
Im Lager.
39.95€ *
1.8T 20V Turbocharger mounting kit
1.8T 20V Turbocharger mounting kit
Turbocharger assembly and sealing kit for all 1.8T engines. Contains all required parts for mounting the loader. Stud bolt + nuts downpipe Stud bolts + nuts exhaust manifold Gsaket downpipe Gasket exhaust manifold Copper sealing rings...
From 15.95€ *
2.0L TFSI & TSI K03 & K04 Turbo Blanket Forge
2.0L TFSI & TSI K03 & K04 Turbo Blanket Forge
The Forge Turboblanket is designed to isolate the radiant heat generated by the turbocharger. These turbo blankets have been extensively tested in the toughest environments, road races and on the track. Forge designed this product to...
199.95€ *
2.0L TSI EA888 Gen.2 Installation Kit for K04 Turbo
2.0L TSI EA888 Gen.2 Installation Kit for K04...
You need this kit if you want to install a K04 turbocharger on your 2.0L TSI. The kit consists of a 90 degree silicone hose for connection to the pressure tube to the intercooler and the aluminum tube from the valve cover to the...
99.95€ *
2.7L Biturbo Audi S4, RS4, RS6 Exhaust Manifold Gasket BAR-TEK®
2.7L Biturbo Audi S4, RS4, RS6 Exhaust Manifold...
Audi 2.7L Biturbo manifold gasket/combustion ring. Gasket between manifold and turbocharger. The gasket should be renewed with every assembly. For the Biturbo 2 gaskets are needed. Price per gasket.
8.95€ *
2.5L TFSI Rear Breather Block-off Plate
2.5L TFSI Rear Breather Block-off Plate
This billet port cover closes the port of the rear breather on the turbocharger This is perfect for installing a catch can system. Will fit all 2.5L TFSI like RS3 and TT RS Made of 6061 aircraft aluminum and red coated.
Im Lager.
25.95€ *
1.8T Bolt on Kit for K04-064 TFSI Turbocharger BAR-TEK®
1.8T Bolt on Kit for K04-064 TFSI Turbocharger...
This kit allows you to drive the K04-064 turbocharger from the 2.0L TFSI on your 1.8T engine. Through the TFSI integral charger you have the advantage that the exhaust manifold and turbocharger are one component. As a result, leakage...
Nur noch 3 Stück im Lager.
489.95€ *
2.0L TSI EA888 Gen.3 MQB turbocharger clamp for downpipe
2.0L TSI EA888 Gen.3 MQB turbocharger clamp for...
2.0L TSI Clamp for Turbocharger Should be replaced after each tightening. A leaking exhaust system directly at the turbocharger can lead to a bad engine run or error messages up to engine fire
Nur noch 3 Stück im Lager.
29.95€ *
2.0L TSI EA888 Gen3 (MQB) Gasket for turbocharger
2.0L TSI EA888 Gen3 (MQB) Gasket for turbocharger
2.0L TSI gasket for Turbocharger Should be replaced after each tightening. A leaking exhaust system directly at the turbocharger can lead to a bad engine run or error messages up to engine fire. Fits for following models: Audi S1 8X Audi...
Im Lager.
19.95€ *
2.0L TFSI Oil Drain Flange Kit Dash 10
2.0L TFSI Oil Drain Flange Kit Dash 10
When running a big turbo setup on a 2.0L TFSI this flange makes plumbing a -10AN oil line simple. Manufactured in house out of 6061 aircraft grade aluminum with precise CNC machines. Sold in a kit with a -10AN adapter flange, o ring, and...
Im Lager.
19.95€ * 29.95€ *
2.0L TFSI EA113 Rear Breather Block-off Plate
2.0L TFSI EA113 Rear Breather Block-off Plate
This billet port cover closes the port of the rear breather on the turbocharger This is perfect for installing a catch can system. Will fit all 2L TFSI like Golf 5, 6 or Audi A3 with the EA113 engine. Made of 6061 aircraft aluminum and...
Im Lager.
19.95€ *
Montage Schrauben Satz für Tial Abgasgehäuse
Bolt Kit for Tial Turbine Housing
Tial Turbine housing clamp and bolt kit. Turbos using 6 bolt mounting pad for CHRA to turbine housing assembly. Includes two half circle clmaps and 6 bolts. Fits for all Tial Turbine Housing. Picture similar.
99.95€ *
UNIVERSAL
Montage Schrauben Satz für Garrett Turbos
Mounting screw set for Garrett Turbos
Special screw kit for Garrett turbochargers to fix the exhaust side to the fuselage assembly. 6 high strength and temperature resistant screws with inch thread. 2 matching retaining brackets. The Garrett screw kit fits all Garrett...
Noch 6 Stück im Lager.
29.95€ *
UNIVERSAL
V-Band Schelle GT42-GT45 Abgasgehäuse zur Rumpfgruppe
V-Band Clamp GT42-GT45 Turbine Housing to CHRA
Special V-Band Clamp for mounting the turbine Housing to CHRA. Fits for Garrett Turbos: -Garrett GT4294 - 731376 -Garrett GT4294R - 774595-4 -Garrett GT4294R - 774595-3 -Garrett GT4294R - 774595-2 -Garrett GT4294R - 774595-1 -Garrett...
25.95€ *
UNIVERSAL
Montage Klammern Satz für Garrett Frischluftgehäuse
Bolt Clamp Kit for Garrett Compressor Housing
Garrett Compressor housing clamp and bolt kit. Turbos using 6 bolt mounting pad for CHRA to compressor housing assembly. Includes 3 half circle clamps and 6 bolts. Fits for all Garrett Compressor housing with short 2-bolt clamps.
25.95€ *

Do you have any questions?

We would be delighted to help if you get lost. Contact us and let us give you the right advice.

Viewed
Just pay
Logo Pre-Payment Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping