Exhaust Systems

In this category you will find all about exhaust systems. Besides Fox exhaust systems and manifolds TeZet as original and start-up options, we have exhaust pipes and exhaust manifold sheets and accessories for VW and BMW exhaust systems. Heat protection materials such as sealant, heat protection tape, heat protection turbocharger kits for exhaust systems and other exhaust tuning around the sports exhaust.

In this category you will find all about exhaust systems. Besides Fox exhaust systems and manifolds TeZet as original and start-up options, we have exhaust pipes and exhaust manifold sheets and... read more »
Close window
Exhaust Systems

In this category you will find all about exhaust systems. Besides Fox exhaust systems and manifolds TeZet as original and start-up options, we have exhaust pipes and exhaust manifold sheets and accessories for VW and BMW exhaust systems. Heat protection materials such as sealant, heat protection tape, heat protection turbocharger kits for exhaust systems and other exhaust tuning around the sports exhaust.

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 8
NEW
2.0L TSI EA888 Evo4 Golf 8 GTI exhaust system with ECE Milltek
2.0L TSI EA888 Evo4 Golf 8 GTI exhaust system...
Milltek 80mm exhaust from catalytic converter with ECE/EG approval for Golf 8 GTI 2.0L TSI. The exhaust systems from Milltek are made of stainless steel and convince with high quality workmanship, optimal fit and a sporty sound....
1,279.95€ *
Audi 2.7L Biturbo S4 & RS4 seal for downpipe
Audi 2.7L Biturbo S4 & RS4 seal for downpipe
Audi 2.7L Biturbo S4 & RS4 Downpipe Y-pipe Seal This seal should always be replaced after disassembly. The multi-layer gasket is made of particularly heat-resistant steel and withstands even the highest temperatures. The kit contains: 2x...
From 19.95€ *
UNIVERSAL
Garrett GTX29-GTX35 V-Band 76mm 3" flange Y-branch stainless steel
Garrett GTX29-GTX35 V-Band 76mm 3" flange...
Flange to Y-pipe for original Garrett V-Band exhaust housing This V-Band ring is needed to connect the original Garrett V-Band to a downpipe. The flange is welded to the end of the downpipe and then connected to the exhaust side of the...
49.95€ *
UNIVERSAL
Garrett GT-GTX V-Band 3.60" V-Band Clamp
Garrett GT-GTX V-Band 3.60" V-Band Clamp
3.640" (90,2mm) V-band clamp for Garrett GT/GTX (30/35/40) turbocharger at the exhaust housing outlet Garrett part number: 446397-0364/Z
33.95€ *
UNIVERSAL
Exhaust reduction cone TITAN BAR-TEK®
Exhaust reduction cone TITAN BAR-TEK®
Our titanium reducers are manufactured from the highest quality grade 2 titanium. They are perfectly suited to connect different pipe diameters, for example as a connector to a muffler or as an end piece. Thanks to its special...
From 29.95€ *
UNIVERSAL
Exhaust flexible pipe TITAN BAR-TEK®
Exhaust flexible pipe TITAN BAR-TEK®
Our titanium flex tubes are manufactured from the highest quality grade 2 titanium. The titanium flex pipe is to compensate for temperature expansions and vibrations in the exhaust system. Thanks to its special properties, titanium is an...
From 139.95€ *
UNIVERSAL
Exhaust pipe bend 90° TITAN BAR-TEK®
Exhaust pipe bend 90° TITAN BAR-TEK®
Our titanium tubes are manufactured from the highest quality, 1mm thick Grade 1 titanium. This is ideal for use in exhaust systems, but also as fuel, cooling water or oil lines. Thanks to its special properties, titanium is an ideal...
From 79.95€ *
UNIVERSAL
Exhaust pipe bend 45° TITAN BAR-TEK®
Exhaust pipe bend 45° TITAN BAR-TEK®
Our titanium tubes are manufactured from the highest quality Grade 1 titanium. This is ideal for use in exhaust systems, but also as fuel, cooling water or oil lines. Thanks to its special properties, titanium is an ideal material for...
From 45.95€ *
UNIVERSAL
Exhaust pipe 2,5" pipe bend 45° 63,5mm TITAN BAR-TEK®
Exhaust pipe 2,5" pipe bend 45° 63,5mm TITAN...
Our titanium tubes are manufactured from the highest quality Grade 1 titanium. This is ideal for use in exhaust systems, but also as fuel, cooling water or oil lines. Thanks to its special properties, titanium is an ideal material for...
149.95€ *
UNIVERSAL
Exhaust pipe 2,5" pipe bend 90° 63,5mm TITAN BAR-TEK®
Exhaust pipe 2,5" pipe bend 90° 63,5mm TITAN...
Our titanium tubes are manufactured from the highest quality, 1mm thick Grade 1 titanium. This is ideal for use in exhaust systems, but also as fuel, cooling water or oil lines. Thanks to its special properties, titanium is an ideal...
195.95€ *
UNIVERSAL
Exhaust pipe 3" pipe bend 90° 76mm TITAN BAR-TEK®
Exhaust pipe 3" pipe bend 90° 76mm TITAN BAR-TEK®
Our titanium tubes are manufactured from the highest quality Grade 1 titanium. This is ideal for use in exhaust systems, but also as fuel, cooling water or oil lines. Thanks to its special properties, titanium is an ideal material for...
205.95€ *
UNIVERSAL
Exhaust pipe 3" pipe bend 45° 76mm TITAN BAR-TEK®
Exhaust pipe 3" pipe bend 45° 76mm TITAN BAR-TEK®
Our titanium tubes are manufactured from the highest quality Grade 1 titanium. This is ideal for use in exhaust systems, but also as fuel, cooling water or oil lines. Thanks to its special properties, titanium is an ideal material for...
175.95€ *
UNIVERSAL
Exhaust pipe straight TITANIUM BAR-TEK®
Exhaust pipe straight TITANIUM BAR-TEK®
Our titanium tubes are manufactured from the highest quality, 1mm thick Grade 1 titanium. This is ideal for use in exhaust systems, but also as fuel, cooling water or oil lines. Thanks to its special properties, titanium is an ideal...
From 79.95€ *
BMW N54B30 35i Downpipe BAR-TEK®
BMW N54B30 35i Downpipe BAR-TEK®
Due to the ø 76mm downpipe, the back pressure behind the turbo is significantly reduced and the chargers are relieved, which gives you more power and a lower exhaust temperature. The Y-pipe is made of stainless steel. For the flanges,...
409.95€ *
2.0L TSI Polo GTI GPF cat-back exhaust system MILLTEK
2.0L TSI Polo GTI GPF cat-back exhaust system...
Milltek 70mm cat back exhaust system from GPF with ECE/EG approved for VW Polo GTI 2.0L TSI. The exhaust system of Milltek are made of stainless steel and are high quality, perfect fit and a good sound. Features: 70mm Pipe diameter 90mm...
From 759.95€ *
2.0L TSI Skoda Octavia RS cat back exhaust system APR
2.0L TSI Skoda Octavia RS cat back exhaust...
The APR Catback system personalizes the look, sound and performance of your Octavia RS. Our straight silencer leaves nothing to be desired in every respect and lets the 4-cylinder growl deeply without restrictions and annoying roar. High...
1,789.95€ *
UNIVERSAL
Sport Cat universal 200cpi EU4 Milltek
Sport Cat universal 200cpi EU4 Milltek
Stainless steel sport catalytic converter from Milltek with EURO 4 emissions standard. To ensure that you do not have any problems during the main inspection, Milltek tuning catalytic converters meet at least the required EURO 4 exhaust...
From 409.95€ *
UNIVERSAL
Sport Cat universal 100cpi Milltek
Sport Cat universal 100cpi Milltek
Stainless steel sport catalytic converter from Milltek. This catalytic converter has less back pressure in the exhaust system and therefore it performs better. Very popular with tuned cars. Can be universally welded on almost all...
259.95€ *
4.0L TFSI Audi RS6 C8 Large Bore Downpipes with 200cpi Sports Cats
4.0L TFSI Audi RS6 C8 Large Bore Downpipes with...
Milltek stainless steel downpipe for Audi 4.0L TFSI engines as installed in the Audi RS6 and RS7 C8. This high quality Milltek downpipe is made of stainless steel and has a tube diameter of 80mm. In addition, there are two high-flow cats...
5,035.95€ *
2.0L TSI Audi S3 8V 3 Inch cat back exhaust system APR
2.0L TSI Audi S3 8V 3 Inch cat back exhaust...
The APR Catback Exhaust System personalizes your vehicle’s looks, sound and performance. Beautifully hand-crafted T304-stainless-steel components adorn the system with stunning TIG-welding throughout. The straight-through...
2,189.95€ *
Tailpips (tips) in various designs 3,5" APR
Tailpips (tips) in various designs 3,5" APR
Our Slash-Cut 3.5 "tips enhance the rear of the car, and the Motorsport-inspired tailpipe trims blend in well with the car's design, with each panel featuring an engraved APR logo. One Set made of two tips
From 98.95€ *
Tailpipes (tips) in various designs 4" APR
Tailpipes (tips) in various designs 4" APR
Our Slash-Cut 4" tips enhance the rear of the car, and the Motorsport-inspired tailpipe trims blend in well with the car's design, with each panel featuring an engraved APR logo. One Set made of two tips.
From 148.95€ *
UNIVERSAL
Universal Silencer "T-Style" Duplex - 1 x 76mm to 2 x 63,5mm Simons
Universal Silencer "T-Style" Duplex - 1 x 76mm...
Universal silencer Duplex T-Style - 76 - 63,5mm Completely made of stainless steel, very quiet Material: Stainless steel 1.4307 absorbing damper Length (body): 500mm Diameter: 140 x 220mm Connections: 1 x 76mm and output 2 x 63mm...
175.95€ *
UNIVERSAL
Universal Silencer "Super" oval - 63,5mm silent Simons
Universal Silencer "Super" oval - 63,5mm silent...
Universal silencer "Super" - 63,5mm Completely made of stainless steel, very quiet Material: Stainless steel 1.4307 Length (body): 320mm Diameter: 185 x 115mm Connections: 63,5mm (slotted suitable for clamp mounting) Power: up to 350hp...
79.95€ *
1 From 8
Viewed
Just pay
Logo Pre-Payment Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping