Downpipes

Downpipes made from stainless steel for VW and Audi engines in 3 inch. Plug and play downpipes or downpipe kits for self made.

Downpipes made from stainless steel for VW and Audi engines in 3 inch. Plug and play downpipes or downpipe kits for self made. read more »
Close window
Downpipes

Downpipes made from stainless steel for VW and Audi engines in 3 inch. Plug and play downpipes or downpipe kits for self made.

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 2
Audi 2.7L Biturbo S4 & RS4 seal for downpipe
Audi 2.7L Biturbo S4 & RS4 seal for downpipe
Audi 2.7L Biturbo S4 & RS4 Downpipe Y-pipe Seal This seal should always be replaced after disassembly. The multi-layer gasket is made of particularly heat-resistant steel and withstands even the highest temperatures. The kit contains: 2x...
From 19.95€ *
UNIVERSAL
Garrett GTX29-GTX35 V-Band 76mm 3" flange Y-branch stainless steel
Garrett GTX29-GTX35 V-Band 76mm 3" flange...
Flange to Y-pipe for original Garrett V-Band exhaust housing This V-Band ring is needed to connect the original Garrett V-Band to a downpipe. The flange is welded to the end of the downpipe and then connected to the exhaust side of the...
49.95€ *
UNIVERSAL
Garrett GT-GTX V-Band 3.60" V-Band Clamp
Garrett GT-GTX V-Band 3.60" V-Band Clamp
3.640" (90,2mm) V-band clamp for Garrett GT/GTX (30/35/40) turbocharger at the exhaust housing outlet Garrett part number: 446397-0364/Z
33.95€ *
UNIVERSAL
Exhaust pipe straight TITANIUM BAR-TEK®
Exhaust pipe straight TITANIUM BAR-TEK®
Our titanium tubes are manufactured from the highest quality, 1mm thick Grade 1 titanium. This is ideal for use in exhaust systems, but also as fuel, cooling water or oil lines. Thanks to its special properties, titanium is an ideal...
From 79.95€ *
BMW N54B30 35i Downpipe BAR-TEK®
BMW N54B30 35i Downpipe BAR-TEK®
Due to the ø 76mm downpipe, the back pressure behind the turbo is significantly reduced and the chargers are relieved, which gives you more power and a lower exhaust temperature. The Y-pipe is made of stainless steel. For the flanges,...
409.95€ *
4.0L TFSI Audi RS6 C8 Large Bore Downpipes with 200cpi Sports Cats
4.0L TFSI Audi RS6 C8 Large Bore Downpipes with...
Milltek stainless steel downpipe for Audi 4.0L TFSI engines as installed in the Audi RS6 and RS7 C8. This high quality Milltek downpipe is made of stainless steel and has a tube diameter of 80mm. In addition, there are two high-flow cats...
5,035.95€ *
UNIVERSAL
Lambda Sensor Eliminator with Metal Catalyst BAR-TEK®
Lambda Sensor Eliminator with Metal Catalyst...
Ideal for all vehicles with cat control function. For example, all 2.0 TFSI models of the VAG have a cat monitor. If the cleaning function of the Kats is no longer sufficient, the engine control personnel will be illuminated in the...
Im Lager.
49.95€ *
2.5L TFSI Audi RS3 & TTRS Downpipe with EWG HJS
2.5L TFSI Audi RS3 & TTRS Downpipe with EWG HJS
Large 96mm stainless steel HJS downpipe with TÜV for your Audi RS3 and TT RS This high-quality processed HJS stainless steel downpipe from has a diameter of 96mm on the turbo and then goes in 2x 2.5 "over.The Rennkat is a 200 cell metal...
2,999.95€ *
2.0L TSI EA888 Gen.3 MQB Downpipe with TÜV/EWG HJS
2.0L TSI EA888 Gen.3 MQB Downpipe with TÜV/EWG HJS
Large 76mm stainless steel HJS downpipe with TÜV for VW Golf 7 GTI 2.0L TSI, Audi A3 8V, Leon Cupra 5F and many more. This high-quality processed HJS stainless steel downpipe from has a diameter of 3 ".The supplied adapter fits directly...
From 1,365.95€ *
2.0L TFSI EA113 & EA888 Downpipe in 3 Inch BAR-TEK®
2.0L TFSI EA113 & EA888 Downpipe in 3 Inch...
The 3 "inch stainless steel downpipe for 2.0L TFSI and TSI engines for a noticeable extra power! The downpipe is mounted directly at the outlet of the turbocharger and leads the exhaust gases to the catalytic converter. The larger the...
From 319.95€ *
2.5L TFSI Downpipe mit Rennkat für Audi RS3 8V
2.5L TFSI Downpipe with Race Cat for Audi RS3 8V
Big Downpipe with 100 cell high flow race cat for your Audi RS3 8V with 2.5L TFSI engine. Downpipe features a CNC machined stainless steel vband flange and turbo outlet. Our 3" mandrel-bent stainless steel design is free of obstructions...
1,565.95€ *
2.0L TFSI HJS-Tuning Downpipe
2.0L TFSI HJS-Tuning Downpipe
HJS-Tuning Downpipe 200cpi Race Catalytic. Power increase due to less backpressure of up to 50%! Specialy for tuned engines or Turbo needed. Catalytic converter is made out of non rosting Steel. 100% Edelstahl + coating inside. Also...
1,509.95€ *
UNIVERSAL
Garrett GT30 GT35 T3 5-Loch WG Flansch Hosenrohr Edelstahl
Garrett GT30 GT35 T3 5-bolt WG Flange Downpipe...
Garrett T3 5-bolt Flange for Downpipe fits for Garrett GT3071R, GT3076R and GT35R with T3 flange and internal Wastegate. -stainless steel -high quality -laser cut Made in Germany! Fits for Garrett Turbos: Garrett GT3071R Garrett GT3076R...
Im Lager.
29.95€ *
1.8T Hosenrohr 76mm (auch mit Kat) BAR-TEK®
1.8T 20V Downpipe 76mm (also with cat) BAR-TEK®
With this your turbo can really give gas! Y-pipe Downpipe 1.8T with 76mm diameter. For the turbocharger it is very important that the exhaust backpressure is as low as possible. Due to the large cross section of 76mm the turbo can...
From 199.95€ * 249.95€ *
UNIVERSAL
Garrett GT28R 5-Loch Flansch Hosenrohr Edelstahl
Garrett GT28R 5-bolt Flange Downpipe stainless...
Garrett 5-bolt GT28R Flange for Downpipe -stainless steel -high quality -laser cut Made in Germany! Fits for Garrett Turbos: Garrett GT2560R (GT28R) Garrett GT2860RS (GT28RS) Garrett GT2871R Garrett GT2876R (GT25/40R) Garrett GT3071R-WG...
29.95€ *
UNIVERSAL
63.5mm 2.5" V-Band Clamp
63.5mm 2.5" V-Band Clamp
2.5" V-Band Clamp for 63.5mm V-Band flange. -stainless steel -high quality
Nur noch 1 Stück im Lager.
19.95€ *
UNIVERSAL
Garrett V-Band 76mm 3" Flansch Hosenrohr Edelstahl
Garrett V-Band 76mm 3" Flange Downpipe...
Special Garrett V-Band 76mm 3" Flange for Downpipe. -stainless steel -high quality Fits for Garrett Turbos with 76mm V-Band turbine housing.
59.95€ *
UNIVERSAL
108mm 4,25" V-Band Clamp
108mm 4,25" V-Band Clamp
4,25" V-Band Clamp for 108mm V-Band flange. -stainless steel -high quality
29.95€ *
UNIVERSAL
Garrett V-Band 63.5mm 2.5" Flange Downpipe stainless steel
Garrett V-Band 63.5mm 2.5" Flange Downpipe...
Special Garrett V-Band 63.5mm 2.5" Flange for Downpipe. -stainless steel -high quality Fits for Garrett Turbos with 63.5mm V-Band turbine housing. Picture shows 76mm flange!
29.95€ *
1.8T 180 PS Audi A3 & TT Quattro Hosenrohr 76mm BAR-TEK®
1.8T 180 HP Audi A3 & TT Quattro Y-pipe 76mm...
With this your turbo can really step on the gas! Y-pipe Downpipe in 76mm diameter for Audi A3 and TT 180 HP Quattro models. For the turbocharger it is especially important that the exhaust back pressure is as low as possible. The large...
679.95€ *
1.8T Audi S3 & TT Quattro Hosenrohr 76mm BAR-TEK®
1.8T Audi S3 & TT Quattro downpipe 3"...
Gives your Turbo more boost! Upgrade downpipe 3" (76mm) for 1.8T 209 and 225 hp as built in Audi S3 and TT. Plug & Play fits following modells: Audi S3 1.8T 209 / 225 PS Quattro Audi TT 1.8T 225 PS Quattro Also available with welded...
From 399.95€ *
2.5L TFSI 4 Downpipe für Audi RS3 & TTRS
2.5L TFSI 4 Downpipe für Audi RS3 & TTRS
Big 4" Downpipe for 2.5L TFSI Audi RS3 and TTRS. Downpipe features a CNC machined 4" T303 stainless steel vband flange and turbo outlet. Our 3" mandrel-bent stainless steel design is free of obstructions and uses a premium core interlock...
1,015.95€ *
UNIVERSAL
Downpipe Kit universal zum selber bauen BAR-TEK®
Downpipe kit universal for self made BAR-TEK®
Complete 3" (76mm) Downpipe kit Universal. Stainless steel V-Band system from turbocharger to cat. This is a complete set of stainless steel piping with practical V-Band clamps for easy installation. The V-Band clamps have a centering...
Nur noch 1 Stück im Lager.
299.95€ *
2.0L TFSI 3" Downpipe für Audi TTS; S3 & Golf 6 R
2.0L TFSI EA113 & EA888 3" Downpipe with 200...
Large 76mm stainless steel downpipe with racing cat for all 2.0L TFSI and TSI like in the Audi TT (S), A3, S3 and VW Golf 6 and many more. This connecting stainless steel downpipe has a diameter of 3". The connection for the exhaust...
519.95€ *
1 From 2
Viewed
Just pay
Logo Pre-Payment Logo Klarna (Ex SOFORT Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping