New Stuff

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 24
NEW
2.0L TFSI POLO 6R WRC Clutch Kit Sachs with SMF 2.0L TFSI POLO 6R WRC Clutch Kit Sachs with SMF
Complete Sports-Clutch-Kit for 2.0L TDSI engines like as POLO 6R WRC . Features For torque up to 550 NM (Organic) or 650 NM (Sinter) Reinforced cover plate with higher preloade and coated surface. Clutch disc with springs and reinforced...
From 1,199.95€ *
1.8T Stroker & 2.0L TFSI forged lightweight crankshaft 1.8T Stroker & 2.0L TFSI forged lightweight...
Forged lightweight crankshaft for your 1.8T or 2.0L TFSI This crankshaft can be used on the 1.8T as a stroker shaft for capacity expansion to 2 liters. The shaft is made of high grade 4340 steel and especially tensile. CNC machined for...
1,489.95€ *
Fuel Injector Extension for Integrated Fuel Rail Fuel Injector Extension for Integrated Fuel Rail
Injector extensions are required when short injectors such as 550 ccm be used with fuel rail. For proper installation, these are often too short. Common to VW / Audi 1.8T 20V AEB and AGU engines. This 12mm extension is simply plugged...
15.95€ *
2.5L TFSI Rear Breather Block-off Plate 2.5L TFSI Rear Breather Block-off Plate
This billet port cover closes the port of the rear breather on the turbocharger This is perfect for installing a catch can system. Will fit all 2.5L TFSI like RS3 and TT RS Made of 6061 aircraft aluminum and red coated.
24.95€ *
1.8T Bolt on Kit for K04-064 TFSI Turbocharger BAR-TEK® 1.8T Bolt on Kit for K04-064 TFSI Turbocharger...
This kit allows you to drive the K04-064 turbocharger from the 2.0L TFSI on your 1.8T engine. Through the TFSI integral charger you have the advantage that the exhaust manifold and turbocharger are one component. As a result, leakage...
499.95€ *
2.0L TSI EA888 Tool for Upgrade High Pressure Pump Kit BAR-TEK® 2.0L TSI EA888 Tool for Upgrade High Pressure...
Tool for mounting the high pressure pump upgrade kit from Autotech at 2.0L TSI EA888 like Golf 6 GTI. The special tool is made of high-strength steel, is black burnished and is required for dismantling the pump.
39.95€ *
2.5L TFSI Audi RS3 & TTRS Downpipe with EWG HJS 2.5L TFSI Audi RS3 & TTRS Downpipe with EWG HJS
Large 96mm stainless steel HJS downpipe with TÜV for your Audi RS3 and TT RS This high-quality processed HJS stainless steel downpipe from has a diameter of 96mm on the turbo and then goes in 2x 2.5 "over.The Rennkat is a 200 cell metal...
2,589.95€ *
2.0L TSI EA888 Gen.2 and Gen.3 I-Beam Con-Rods BAR-TEK® 2.0L TSI EA888 Gen.2 and Gen.3 I-Beam Con-Rods...
High Quality I-Beam Conrods made by BAR-TEK. Features conrods: Original BAR-TEK® 144x23mm very light for extreme performance with ARP rod bolts and ARP paste H-Schaft design up to 1000hp Additional riffle drilling hole for piston pin...
699.95€ *
GFB G-Force II Elektronische Ladedruckkontrolle High Performance GFB G-Force II Electronic charge pressure...
The Geforce II is one of the best boost pressure controllers worldwide. Features: Touch display with menu buttons 6 different display colors 6 free programmable settings Closed-loop boost pressure correction Warning message if the boost...
269.95€ *
1.8L TSI High Performance Pistons & Conrods Set JE Pistons & BAR-TEK® 1.8L TSI High Performance Pistons & Conrods Set...
JE forged pistons and specially conrods made for BAR-TEK® Set of JE Pistons and BAR-TEK I-Beam Conrods! Complete Kit for your 1.8L TSI EA888 engine with belt driven. This is the perfect set for your 1.8L TSI engine up to 650 hp. Features...
1,199.95€ *
1.8L TSI POLO 6R Clutch Kit Sachs with SMF 1.8L TSI POLO 6R Clutch Kit Sachs with SMF
Complete Sports-Clutch-Kit for 1.8L TSI engines like as POLO 6R. Features For torque up to 550 NM (Organic) or 650 NM (Sinter) Reinforced cover plate with higher preloade and coated surface. Clutch disc with springs and reinforced...
1,449.95€ *
1.8L TSI EA888 I-Beam Con-Rods BAR-TEK® 1.8L TSI EA888 I-Beam Con-Rods BAR-TEK®
High Quality I-Beam Conrods made by BAR-TEK. Features conrods: Original BAR-TEK® 148x21mm very light for extreme performance with ARP rod bolts and ARP paste I-Schaft design up to 900hp Additional riffle drilling hole for piston pin 100%...
599.95€ *
1 From 24
Viewed
Just pay
Logo Vorkasse SLogo ofort Überweisung Logo Paypal Logo Mastercard Logo VISA Logo Maestro Logo VISA electron Logo Postepay Logo Servired Logo Carte Bleue Logo iDEAL
100 % safe shopping
Seal TÜV seal SSL 20 Years BAR-TEK® Motorsport
15 years of motorsport experience
© BAR-TEK® Motorsport GmbH - All Rights Reserved
All prices incl. VAT. and excl. Shipping